Company: | 深圳市福好运科技有限公司 |
Location: | China - Guangdong, District Bao'An, shenzhen, Guangdong, China. |
Price: | 1/set |
Contact: | Connie(Salesperson) |
Contact Me: |
Tell:+86-14786692449 Mobile:+86-14786692449 |
180° DPDT PRESSURE SWITCH WITH LOCK 6PIN PITCH 2,54MM Pushbutton Switch 8.5x8.5x17.7MM Self-Locking
180° DPDT PRESSURE SWITCH WITH LOCK 6PIN PITCH 2,54MM Pushbutton Switch 8.5x8.5x17.7MM Self-Locking 6pin
Product Details
Category: switches
PN: Pushbutton Switch 8.5x8.5x17.7MM
Brand: /
Description: Pushbutton Switch 8.5x8.5x17.7MM Self-Locking 6pin
Package: switch
Please come to sale@hysmt.cn to inquire about prices |
Applications
1、It is used to isolate the power supply and disconnect the high-voltage maintenance equipment from the energized equipment so that there is a clearly visible disconnection point between them.
2、The disconnecting switch cooperates with the circuit breaker to carry out reversing operation according to the need of system operation mode, in order to change the system operation wiring mode.
3、It is used to connect or disconnect small current circuits. The disconnecting switch can carry out the following operations: pulling and closing the bypass current of the closed circuit switch; pulling and closing the grounding wire of the neutral point of the transformer, but when the neutral point is connected with an arc-absorbing coil, it can be operated only when there is no fault in the system; pulling and closing the voltage transformer and the arrester; pulling and closing the capacitance currents of the busbar and the equipment directly connected to the busbar; pulling and closing the unloaded lines with capacitance currents of no more than 5 amps; triple disconnecting switches. can pull and close loads with voltages of 10 kV or less and currents of 15 A or less, and so on.
When operating the disconnecting switch, it should be noted that when the line is energized, the disconnecting switch on the bus side should be closed first, then the disconnecting switch on the line side should be closed, and then the circuit breaker should be closed. When the line is de-energized, the circuit breaker should be disconnected first, and then the disconnecting switch should be pulled. The high voltage disconnecting switch should not be pulled or closed with load.
QC Process
ZK Electronic is an SMD Connectors distributor. We have supported global customers' business with our high-quality products and service. To match customers' requirements, our QC Team will conduct a complete inspection of all the products before shipping out.
The procedures of Connectors inspection includes:
▪ Lable Verification to check if the part is original and consistent with the order
▪ Appearance Inspection to make sure the package is correct and there is no damage to the surface
▪ Package Inspection
▪ Third-party test conduction via our in-house, certified test labs for quality guarantee
▪ Picture archive for the shipping package
Each step of the inspection is very rigorous and aims to ensure that all products are delivered with the expected standard of excellence and quality.
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- fastest single needle bag closing machine for sewing bagsfastest single needle bag closing machine for sewing bags The fastest single needle bag closing machine ( 2700 rpm ) for all kinds of filled bags ." "
- Standard needle thread double locked bag closing machineAutomatic single needle industrial closing machine for bags Single needle machine exclusively designed for crepe-tape bound closing of filled bags made of" "
- versatile small volume bagging Sewing machine SystemPortable two thread stitch sewing bag closing machine Portable two thread chain stitch bag closing machine with direct drive by fan-cooled electric motor ." "
- Plain Sew Heavy Duty Bag Closing System machineryneedle thread double lock chain stitch bag closing machine Improved economy , two thread double locked chainstitch bag closing machine , standard version" "