IB IL 24 PWR IN/2-F-D-PAC - Power module

2862152

Inline power terminal block, complete with accessories (connector and labeling field), 24 V DC, with fuse (Main and segment voltage) and diagnostics

Width 12.2 mm
Height 119.8 mm
Depth 71.5 mm

Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Inline local bus
Number of interfaces 2
Connection method Inline data jumper
Transmission speed 500 kbps

Module
ID code (dec.) 190
ID code (hex) BE
Length code (hex) C2
Length code (dec) 194
Process data channel 2 bit
Input address area 2 bit
Output address area 0 bit
Register length 2 bit
Required parameter data 1 Byte
Required configuration data 4 Byte

Product type I/O component
Product family Inline
Type modular
Number of plugs 1
Operating mode Process data mode with 2 bits
Special properties 24 V DC
UM, US
With fuse (UM, US)
With diagnostics
Insulation characteristics
Protection class III (IEC 61140, EN 61140, VDE 0140-1)

Test section 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min.
24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min.
7.5 V supply (bus logic)/functional ground 500 V AC 50 Hz 1 min.
Protective circuit Surge protection; Suppressor diode
Reverse polarity protection; Parallel polarity protection diode
Overload protection, short-circuit protection in the main and segment circuits; Fuse 5x20 with 6.3 A slow-blowFuses with other values can also be used. The maximum fuse value is 6.3 A.For fuses with a value greater than 2 A, only slow-blow fuses may be used.
Fuse SI 5 x 20 6, 300 AT (in scope of delivery)
Supply
I/O voltage 24 V DC
I/O voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Residual ripple ± ±5 %
Max. current consumption 4 A
Typical current consumption 30 mA
Potentials: Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current draw max. 25 mA
Power consumption max. 0.19 W
Potentials: Main circuit supply (UM)
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V ... 30 V (including all tolerances, including ripple)
Current draw typ. 4 A (nominal value)
Potentials: Segment circuit supply (US)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw typ. 4 A (nominal value)

Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm