TC ROUTER 3002T-4G - Router

2702528

Industrial 4G LTE router, European version, fallback to 3G UMTS/HSPA+ and 2G GPRS/EDGE, 2 Ethernet interfaces, firewall, NAT, IPsec and OpenVPN support, 2x SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output

The TC ROUTER for cellular communication implements high-performance data links of up to 150 Mbps via mobile 4G LTE networks. This enables you to establish a mobile broadband connection for highly flexible site networking even in places where a wired Internet connection is not available. These connections can be used to transmit sensitive data securely over mobile networks. Furthermore, the TC ROUTER offers a high level of security thanks to IPsec or OpenVPN tunnels, as well as an integrated stateful packet inspection firewall. This means that you can reliably protect your application against unauthorized access.

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Product type Cellular router
Application Ethernet
MTTF 383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
78 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

Electrical isolation VCC // LTE // Ethernet // PE
Maximum power dissipation for nominal condition 4.8 W
Mains type Cellular communication
Supply
Supply voltage range 10 V DC ... 30 V DC (Via pluggable Push-in terminal block)
Typical current consumption < 200 mA (24 V DC)
65 mA (With activated energy-saving mode)
Max. current consumption 1.7 A
Function
Management Web-based management, SNMP

Digital
Description of the input Digital input
Number of inputs 2
Voltage input signal 10 V DC ... 30 V DC
Switching level "1" signal 10 V DC ... 30 V DC

Signal
Output name Digital output
Number of outputs 1
Voltage output signal 10 V DC ... 30 V DC (depending on the operating voltage)
Current output signal ≤ 50 mA (Not short-circuit proof)

Supply
Connection method Push-in spring connection
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 0.75 mm²
Single conductor/terminal point, rigid 0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible 0.14 mm² ... 1.5 mm²
Conductor cross section, flexible [AWG] 26 ... 16
Stripping length 9.00 mm

Signal Ethernet
Web server yes
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Serial transmission speed 10/100 Mbps, auto negotiation
Connection method RJ45 jack, shielded
No. of channels 2
Transmission length 100 m (shielded twisted pair)
Protocols supported TCP/IP, UDP/IP, FTP, HTTP(S)
Auxiliary protocols ARP, DHCP, PING (ICMP), SNMP V1/V2, SMTP(S), NTP, SSL/TLS, STARTTLS
Wireless
Interface description GSM / GPRS / EDGE / UMTS / HSPA+ / LTE
Frequency range 2600 MHz (LTE B38)
2500 MHz (LTE B41)
2300 MHz (LTE B40)
2100 MHz (LTE B1)
1800 MHz (LTE B3)
2600 MHz (LTE B7)
900 MHz (LTE B8)
800 MHz (LTE B20)
700 MHz (LTE B28A)
2100 MHz (UMTS/HSPA B1)
900 MHz (UMTS/HSPA B8)
900 MHz (2 W (EGSM))
1800 MHz (1 W (EGSM))
Data rate ≤ 150 Mbps (LTE, DL)
≤ 50 Mbps (LTE, UL)
Antenna 50 Ω impedance SMA antenna socket
Antenna connection method SMA (female)
SIM Interface 1.8 volt, 3 volt
LTE CAT4
Country support Europe