AXL F AO8 1F - Analog module

2688080

Axioline F, Analog output module, Analog outputs: 8, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Width 53.6 mm
Height 126.1 mm
Depth 54 mm
Note on dimensions The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Axioline F local bus
Number of interfaces 2
Connection method Bus base module
Transmission speed 100 Mbps

Module
Input address area 16 Byte
Output address area 16 Byte
Required parameter data 27 Byte
Required configuration data 7 Byte

Analog:
Output name Analog outputs
Connection method Push-in connection
Connection technology 2-conductor
Note regarding the connection technology shielded, twisted pair
Number of outputs 8
D/A conversion time 5 µs
D/A converter resolution 16 bit
Protective circuit Short-circuit and overload protection; electronic
Transient protection; Suppressor diode
Data formats IB IL, S7-compatible
Representation of output values 16 bits (15 bits + sign)
Process data update 300 µs
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
-20 mA ... 20 mA
Load/output load current output to 500 Ω
Voltage output signal 0 V ... 5 V
-5 V ... 5 V
0 V ... 10 V
-10 V ... 10 V
Load/output load voltage output > 2 kΩ
Permissible cable length max. 250 m (Reference cable type LiYCY (TP) n*2*0.5 mm²)

Product type I/O component
Product family Axioline F
Type block modular
Mounting position any (observe temperature derating)
Scope of delivery including bus base module and Axioline F connectors
Insulation characteristics
Overvoltage category II (IEC 60664-1, EN 60664-1)
Pollution degree 2 (IEC 60664-1, EN 60664-1)

Potentials
Power consumption typ. 1.725 W (To UBus and UA, intrinsic power input, no load, output 0 V, up to HW 04)
typ. 1.4 W (To UBus and UA, intrinsic power input, no load, output 0 V, as of HW 05)
max. 6.29 W (To UBus and UA, 8 current channels, output 20 mA, up to HW 04)
max. 5.88 W (To UBus and UA, 8 current channels, output 20 mA, as of HW 05)
Potentials: Axioline F local bus supply (UBus)
Supply voltage 5 V DC (via bus base module)
Current draw max. 130 mA (up to HW 04)
max. 50 mA (from HW 05)
typ. 105 mA (up to HW 04)
typ. 40 mA (from HW 05)
Power consumption max. 0.65 W (up to HW 04)
max. 0.25 W (from HW 05)
typ. 0.525 W (up to HW 04)
typ. 0.2 W (from HW 05)
Potentials: Supply for analog modules (UA)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 235 mA (8 current channels, 20 mA output)
typ. 110 mA (8 voltage channels, 10 V output)
Power consumption max. 5.64 W (8 current channels, 20 mA output)
Protective circuit Surge protection; electronic (35 V, 0.5 s)
Reverse polarity protection; up to HW 03: polarity protection diodefrom HW 04: parallel diode; with external 5 A fuse (for startup only)
Transient protection; Suppressor diode
Electrical isolation/isolation of the voltage ranges
Test voltage: 5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC, 50 Hz, 1 min.
Test voltage: 5 V supply of the local bus (UBus)/analog outputs 500 V AC, 50 Hz, 1 min.
Test voltage: 5 V supply of the local bus (UBus) / functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O)/analog outputs 500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O) / functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: Analog outputs/functional ground 500 V AC, 50 Hz, 1 min.

Connection technology
Connection name Axioline F connector
Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.