OPT-24DC/230AC/ 2 - Miniature solid-state relay

2982171

Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/2 A

Product type Single solid-state relay
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics: Standards/regulations
Insulation Basic insulation
Overvoltage category III
Pollution degree 2

Maximum power dissipation for nominal condition 0.17 W
Test voltage (Input/output) 2.5 kV (50 Hz, 1 min., input/output)
Standards/regulations
Rated insulation voltage 250 V AC

Nominal input voltage UN 24 V DC
Input voltage range in reference to UN 0.8 ... 1.2
Input voltage range 19.2 V DC ... 28.8 V DC
Switching threshold "0" signal, voltage < 8.4 V DC
Switching threshold "1" signal voltage > 18 V DC
Typical input current at UN 7 mA
Typical response time 10 ms
Typical turn-off time 10 ms
Protective circuit Reverse polarity protection; Polarity protection diode
Transmission frequency 10 Hz

Contact switching type 1 N/O contact
Design of digital output electronic
Output nominal voltage 230 V AC
Output voltage range 24 V AC ... 253 V AC
Limiting continuous current 2 A (see derating curve)
Maximum inrush current 30 A (10 ms)
Min. load current 25 mA
Leakage current typ. 1 mA
Surge current 30 A (10 ms)
Max. load value 4 A2s (tp = 10 ms, at 25 °C)
Voltage drop at max. limiting continuous current ≤ 1 V
Output circuit 2-conductor floating, zero voltage switch
Protective circuit Surge protection; RC element

Dimensional drawing
Width 12.7 mm
Height 29 mm
Depth 15.7 mm

Color black (RAL 9005)
Flammability rating according to UL 94 V0 (Housing)

Ambient conditions
Degree of protection RT III
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -25 °C ... 70 °C

Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Standards/regulations
Standards/regulations IEC 60664
EN 50178

Assembly instructions See derating curve
Mounting position any