Inline, Bus coupler, CANopen®, MINI COMBICON, transmission speed in the local bus: 500 kbps / 2 Mbps, degree of protection: IP20, including network connector, Inline connector, and marking field
The bus coupler is intended for use within a CANopen® network. It is the link to the Inline I/O system. Up to 63 Inline devices can be connected to the bus coupler. A corresponding EDS file is available for integrating the Inline station into the programming system. This file can be downloaded via the product at www.phoenixcontact.com/products.
Dimensional drawing
Width 40 mm
Height 119.4 mm
Depth 71.5 mm
Note on dimensions Housing dimensions
CANopen®
Number of interfaces 1 (Connected to functional ground with a capacitor)
Connection method MINI COMBICON
Number of positions 5
Transmission speed 1 Mbps, 800 kbps, 500 kbps, 250 kbps, 125 kbps, 50 kbps, 20 kbps, 10 kbps (Can be set via DIP switch or automatic detection)
Inline local bus
Number of interfaces 1
Connection method Inline data jumper
Transmission speed 500 kbps / 2 Mbps (automatic detection, no combined system)
System limits
Number of supported devices max. 63 (per station)
Number of local bus devices that can be connected max. 63
Number of devices with parameter channel max. 16
Number of supported branch terminals with remote bus branch 0
Module
ID code (hex) none
Product type I/O component
Product family Inline
Type modular
Scope of delivery including network connector, Inline connector, and marking field
Diagnostics messages CRC error Message about the emergency object
I/O error Message about the emergency object
Power error Message about the emergency object
Module change errors Message about the emergency object
Inactive local bus Message about the emergency object
Inline connection error Message about the emergency object
Faulty Inline cycles Message about the emergency object
Potentials
Power consumption typ. 1.3 W (entire device)
Potentials: Bus coupler supply UBK; Communications power UL (7.5 V) and the analog supply UANA (24 V) are generated from the bus coupler supply.
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 0.9 A (with max. number of connected I/O terminal blocks)
typ. 51 mA (no local bus devices connected)
Potentials: Communications power (UL)
Supply voltage 7.5 V DC
Potentials: Supply of analog modules (UANA)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Potentials: Main circuit supply (UM)
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Potentials: Segment circuit supply (US)
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
PSR-PC20-1NO-1NC-24DC-SP - Coupling relay 2700578 Coupling relay for SIL 3 high - and low-demand applications , couples digital output signals to the" "
PSI-MOS-PROFIB/FO1300 E - FO converters 2708559 Fiber optic converter with integrated optical diagnostics , alarm contact , for PROFIBUS up to 12 Mbps ," "
PTFIX 6 12X2,5-NS35A BU - Distribution block
PTRV 4-PV、RD - Potential distributors
SAC-3P-M12MR/10,0-800 - Sensor/actuator cable
