Company: | 上海当临自动化科技有限公司 |
Location: | China - Shanghai,上海市青浦区练西公路2850号1幢 |
Price: | Negotiation |
Contact: | Jason(Manager) |
Contact Me: |
Tell:+86-19921425125 Mobile:+86-19921425125 Email:1063732665591112465926@q95q.7c109om |
SACC-M12MR-4CON-PG7-M - Connector
SACC-M12MR-4CON-PG7-M - Connector
1681101
Connector, Universal, 4-position, Plug angled M12, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg7, external cable diameter 4 mm ... 6 mm
Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Assembly instructions The connector pin assignment can be rotated 90° to the cable outlet
Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 4
No. of cable outlets 1
Shielded no
Coding A
Cable outlet angled
Pg screw connection Pg7
Insulation characteristics
Overvoltage category II
Degree of pollution 3
Dimensional drawing
Length 41 mm
External dimensions
Outside diameter 4 mm ... 6 mm
Housing
Diameter housing 20 mm
Flammability rating according to UL 94 HB
Seal material NBR
Material of grip body PA
Contact material CuZn
Contact surface material CuSnZn
Contact carrier material PA
Material for screw connection Zinc die-cast, nickel-plated
Conductor connection
Connection method Screw connection
Connection cross section 0.25 mm² ... 0.75 mm² (without ferrule)
0.14 mm² ... 0.75 mm² (with ferrule)
0.25 mm² ... 0.75 mm² (solid)
Connection cross section AWG 24 ... 18 (without ferrule)
26 ... 20 (with ferrule)
Stripping length of the individual wire 5 mm
Tightening torque 0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
0.8 Nm ... 1 Nm (Pressure screw with sleeve housing)
Rated surge voltage 2.5 kV
Contact resistance ≤ 8 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 250 V AC
250 V DC
Nominal current IN 4 A
Mechanical data
Insertion/withdrawal cycles ≥ 50
Connection 1
Head design Plug
Head cable outlet angled
Head thread type M12
Coding A
Signal type/category Universal
Stripping length of the individual wire 5 mm
Ambient conditions
Degree of protection IP67
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- Overview of electric vehicle charging station construction specifications and requirementsDescription : Regarding the safety protection issues that need to be paid attention to in car charging piles : 1 ." "
- PT 1,5 S-3L - Multi-level terminal blockPT 1,5/S-3L - Multi-level terminal block 3213713 Multi-level terminal block , nom ." "
- TTC-6-2XTVSD-24DC-PT - Surge protection deviceTTC-6-2XTVSD-24DC-PT - Surge protection device 2906808 Fine surge protection for two signal wires with common reference potential ." "
- Q-FSMA-KT - F-SMA connectorQ-FSMA-KT - F-SMA connector 1885994 QUICKON-FSMA plug , for polymer fibers , 4-part set Product type Fiber optic connector ( cable side ) Type FSMA Number" "