The battery powered electromagnetic flowmeter converter adopts internal battery power supply without the need for external power supply, and is suitable for situations where the outdoor power grid cannot reach or the power grid is difficult to lay. It is particularly suitable for the detection, measurement, and settlement of tap water supply systems.
The battery powered electromagnetic flowmeter adopts a high-performance lithium battery power supply system, fully digital signal processing, stable operation, high measurement accuracy, and strong anti-interference ability. It realizes automatic bidirectional flow measurement, on-site instantaneous flow, and cumulative total display in both directions.
characteristic
1. Replacing the battery is simple and convenient.
2. A large screen LCD display that can display flow rate, flow rate, cumulative total amount in both directions, and can also provide alarms.
3. Electromagnetic flow converters can be integrated or split type
The WF-LDCE-D battery powered electromagnetic flowmeter is developed based on Faraday's law of electromagnetic induction. It is divided into two parts: electromagnetic flow sensor and electromagnetic flow converter. The electromagnetic converter is a separate display/integrated display, with connection methods of clamp type, flange type, and insertion type, which can measure the conductivity of liquids.
Advantages of WF-LDCE-D Battery Powered Electromagnetic Flowmeter
1. There are no moving parts inside the measuring tube, no blockage in the pipeline, zero pressure loss, and wear resistance.
2. The measurement data is not affected by changes in fluid density, temperature, pressure, or viscosity.
3. Not in direct contact with the medium, with inner lining and different electrode materials, it can measure the flow rate of high-temperature and highly corrosive media.
4. The requirements for straight pipe sections are relatively low.
5. Can output current signals, RS485 communication, Hart protocol, etc.
6. Easy installation and convenient operation.
7. LCD display, digital display.
8. Mainly used to measure the volume flow rate of conductive liquids in closed pipelines.
Selection Guide for WF-LDCE-D Battery Powered Electromagnetic Flowmeter
1. Measure the instantaneous flow rate and cumulative flow rate of the medium
2. Pipeline diameter and pressure resistance level
3. Select appropriate lining and electrodes based on the pH of the medium
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
Multiple Units : These scales can display weight measurements in various units , such as kilograms , pounds , ounces , or newtons , depending on the scale" "
Crane weighing scales , also known as crane scales or crane load cells , are specialized weighing devices designed for the purpose of lifting and weighing" "
Sewage flow meter
Hydrochloric acid sulfuric acid flow meter
Manufacturer of steam vortex flowmeter
IC card prepayment
battery powered electromagnetic flowmeter
Boiler steam vortex flowmeter
