RIF-0-OPT-24DC/24DC/2 - Solid-state relay module

2905293

Pre-assembled solid-state relay module with push-in connection, consisting of: relay base with ejector and plug-in miniature solid-state relay. Input voltage: 24 V DC. Output: 3 - 33 V DC/3 A

Product type Solid-state relay module
Product family RIFLINE complete
Application Universal
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation Basic insulation
Overvoltage category III
Pollution degree 2

Maximum power dissipation for nominal condition 0.2 W
Test voltage (Input/output) 2.5 kVrms (50 Hz, 1 min., input/output)
Air clearances and creepage distances between the power circuits
Rated insulation voltage 250 V AC
Rated surge voltage 4 kV

Rated actuating voltage UC 24 V DC
Voltage range with reference to UC 0.8 ... 1.2
Rated actuating current IC 8.5 mA
Input voltage range 19.2 V DC ... 28.8 V DC
"0" signal switching threshold in reference to UC < 0.4
"1" signal switching threshold in reference to UC > 0.8
Typical response time 20 µs
Typical turn-off time 300 µs
Status display Yellow LED
Protective circuit Freewheeling diode
Transmission frequency 300 Hz

Contact switching type 1 N/O contact
Design of digital output electronic
Output voltage range 3 V DC ... 33 V DC
Limiting continuous current 3 A (see derating curve)
Maximum inrush current 15 A (10 ms)
Surge voltage protection > 33 V
Voltage drop at max. limiting continuous current < 200 mV
Output circuit 2-conductor, floating
Protective circuit Reverse polarity protection
Surge protection
Utilization category CB Scheme (IEC 60947-5-1) DC12, 3 A/24 V

Connection method Push-in connection
Stripping length 8 mm
Conductor cross section rigid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG 24 ... 16

Width 6.2 mm
Height 93 mm
Depth 66 mm

Color gray (RAL 7042)
Flammability rating according to UL 94 V2 (Housing)

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60