IB IL 24 TC-PAC - Analog module

2861360

Inline thermistor terminal, complete with accessories (connector and marking field), 2-conductor connection technology

Width 12.2 mm
Height 119.8 mm
Depth 71.5 mm

Inline local bus
Connection method Inline data jumper
Transmission speed 500 kbps
Transmission physics Copper

Module
ID code (dec.) 190
ID code (hex) BE
Length code (hex) 41
Length code (dec) 65
Process data channel 4 bit
Input address area 4 bit
Output address area 0 Byte
Register length 4 bit
Required parameter data 1 Byte
Required configuration data 4 Byte

Analog
Input name Resistance sensor
Description of the input Input for PTC thermistor
Number of inputs 1
Connection method Spring-cage connection
Connection technology 2-conductor
Sensor types (RTD) that can be used PTC thermistor according to DIN 44081 or DIN 44082
Input filter time typ. 10 ms
Nominal value of the current sources max. 1.2 mA (For non-load voltage of < 8 V DC)
Linear resistance measuring range 2.7 kΩ ... 3.5 kΩ (Shutdown range, total resistance)
50 Ω ... 2.25 kΩ (Operating range, total resistance)

Analog:
Connection method Spring-cage connection
Connection technology 2-conductor
Number of outputs 1
Protective circuit short-circuit and overload proof
Current output signal 500 mA (per output)
Voltage output signal 24 V DC (US - 1 V)
Load/output load voltage output < 2.7 kΩ (Total resistance for output signal HIGH)

Product type I/O component
Product family Inline
Type modular

Potentials
Power consumption max. 12 W (For R = 12 Ω, L = 1.2 H/48 Ω)
Potentials: Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current draw max. 60 mA
Potentials: Segment circuit supply (US)
Supply voltage 24 V DC (via voltage jumper)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 500 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC, 50 Hz, 1 min.
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logics)/24 V analog supply (analog I/O) 500 V AC, 50 Hz, 1 min.
Test voltage: 24 V analog supply (analog I/O)/functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: Thermistor / all other areas 1200 V AC, 50 Hz, 1 min.

Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
Inline connector
Connection method Spring-cage connection
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm

Ambient conditions
Ambient temperature (operation) -25 °C ... 55 °C
Degree of protection IP20
Air pressure (operation) 80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) -25 % ... 55 % (75% average, 85% seldom)
Permissible humidity (storage/transport) -25 % ... 85 %