FL SWITCH 1004N-FX SM - Industrial Ethernet Switch

1085214

Unmanaged Switch 1000, 4 RJ45 ports 10/100 Mbps, 1 SC single mode 100 Mbps, PROFINET Conformance-Class A

Width 22.5 mm
Height 117 mm
Depth 84 mm

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Polycarbonate fiber reinforced

Mounting type DIN rail mounting

Ethernet (RJ45)
Number of interfaces 4
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Ethernet in RJ45 twisted pair
Transmission length 100 m (per segment)
Signal LEDs Data receive, link status
No. of channels 4 (RJ45 ports)
Ethernet FO
Number of interfaces 1
Connection method SC
Transmission speed 100 Mbps (full duplex)
Transmit capacity, minimum -20 dBm
Transmit capacity, maximum 0 dBm
Minimum receiver sensitivity -32 dBm
Maximum receiver sensitivity 0 dBm
Transmission physics Single-mode fiberglass
Transmission length 20 km (fiberglass with F-G 9/125 0.5 dB/km)
Wavelength 1310 nm
No. of channels 1 (SC single mode)

Product type Switch
Product family Unmanaged Switch 1000
MTTF 95.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
298.8 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
188.3 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Switch functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode
PROFINET conformance class Conformance-Class A
MAC address table 2k
Status and diagnostic indicators LEDs: US, link and activity per port
Additional functions 100 BASE-TX/100BASE-FX (IEEE 802.3u)
Quality of Service (QoS) prioritization (IEEE 802.1p)
Energy-efficient Ethernet (IEEE 802.3az)
10Base-T (IEEE 802.3)
Security functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode

Maximum power dissipation for nominal condition 2.196 W (at 24 V DC)
Transmission medium Copper
FO
Supply
Supply voltage (DC) 24 V DC
Supply voltage (AC) 24 V AC (50/60 Hz)
Supply voltage range 9 V DC ... 32 V DC
18 V AC ... 30 V AC (50/60 Hz)
Power supply connection Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 244 mA (at 9 V DC)
Typical current consumption 51 mA (at 24 V DC)