FL SWITCH 1105N-2SFP - Industrial Ethernet Switch

1085171

Narrow Ethernet switch, five RJ45 ports with 10/100/1000 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

Width 22.5 mm
Height 140.4 mm
Depth 92.4 mm

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Polycarbonate fiber reinforced

Mounting type DIN rail mounting

Ethernet (RJ45)
Number of interfaces 5
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100/1000 Mbps
Transmission physics Ethernet in RJ45 twisted pair
Transmission length 100 m (per segment)
Signal LEDs Data receive, link status
No. of channels 5 (RJ45 ports)
Ethernet (SFP)
Number of interfaces 2
Connection method SFP
Transmission speed 100/1000 Mbps (full duplex)
Transmission physics Depending on the SFP module
Transmission length up to 40 km (Depending on the fiber/SFP module used)
Signal LEDs Data receive, link status
No. of channels 2 (SFP ports)

Product type Switch
Product family Unmanaged Switch 1000
MTTF 59.2 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
872.1 Years ()
836.5 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Switch functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode
PROFINET conformance class Conformance-Class A
MAC address table 4k
Status and diagnostic indicators LEDs: US, link and activity per port
Additional functions 100 BASE-TX/100BASE-FX (IEEE 802.3u)
Jumbo frames (Max. 9,216 bytes)
Quality of Service (QoS) prioritization (IEEE 802.1p)
Energy-efficient Ethernet (IEEE 802.3az)
Gigabit Ethernet 1000BASE-T (IEEE 802.3ab)
10Base-T (IEEE 802.3)
Security functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode

Maximum power dissipation for nominal condition 4.635 W (at 24 V DC)
Transmission medium Copper
Supply
Supply voltage (DC) 24 V DC
Supply voltage (AC) 24 V AC (50/60 Hz)
Supply voltage range 9 V DC ... 32 V DC
18 V AC ... 30 V AC (50/60 Hz)
Power supply connection Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 515 mA (at 9 V DC)
Typical current consumption 30 mA (at 24 V DC)

Connection technology
Connection name Power supply
pluggable yes
Power supply
Connection method Push-in spring connection
Conductor cross section, rigid 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
Stripping length 10 mm