FL SWITCH 1004N-SFX - Industrial Ethernet Switch

1085177

Narrow Ethernet switch, four RJ45 ports with 10/100 Mbps on all ports, one SFP port with 100 Mbps, automatic data transmission speed detection, autocrossing function, and QoS

Width 22.5 mm
Height 117 mm
Depth 84 mm

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Polycarbonate fiber reinforced

Mounting type DIN rail mounting

Ethernet (RJ45)
Number of interfaces 4
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Ethernet in RJ45 twisted pair
Transmission length 100 m (per segment)
Signal LEDs Data receive, link status
No. of channels 4 (RJ45 ports)
Ethernet (SFP)
Number of interfaces 1
Connection method SFP
Transmission speed 100 Mbps (full duplex)
Transmission physics Depending on the SFP module
Transmission length up to 40 km (Depending on the fiber/SFP module used)
Signal LEDs Data receive, link status
No. of channels 1 (SFP port)

Product type Switch
Product family Unmanaged Switch 1000
MTTF 138.3 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
1647 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
1503.6 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Switch functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode
PROFINET conformance class Conformance-Class A
MAC address table 2k
Status and diagnostic indicators LEDs: US, link and activity per port
Additional functions 100 BASE-TX/100BASE-FX (IEEE 802.3u)
Quality of Service (QoS) prioritization (IEEE 802.1p)
Energy-efficient Ethernet (IEEE 802.3az)
10Base-T (IEEE 802.3)
Security functions
Basic functions Unmanaged switch
Autonegotiation
Store and Forward switching mode

Maximum power dissipation for nominal condition 1.935 W (at 24 V DC)
Transmission medium Copper
Supply
Supply voltage (DC) 24 V DC
Supply voltage (AC) 24 V AC (50/60 Hz)
Supply voltage range 9 V DC ... 32 V DC
18 V AC ... 30 V AC (50/60 Hz)
Power supply connection Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 215 mA (at 9 V DC)
Typical current consumption 21 mA (at 24 V DC)

Connection technology
Connection name Power supply
pluggable yes
Power supply
Connection method Push-in spring connection
Conductor cross section, rigid 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
Stripping length 10 mm