SACC-M12-SCO NUT - Housing screw connection

1552243

Housing screw connection, Socket, M12-SPEEDCON, Front mounting, M12 x 1, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1237399

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information: Lock nut is included in the scope of delivery

Product type Panel mounting base
Thread type M12

Tightening torque 1.5 ... 2 Nm

Material Zinc die-cast (nickel-plated)
Seal material EPDM
Material for screw connection Brass, nickel-plated

Connection 1
Head design Socket
Head thread type M12
Head locking type SPEEDCON

Mechanical data
Insertion/withdrawal cycles > 100

Ambient conditions
Degree of protection (when plugged in) IP67 (correctly plugged in and locked)
Degree of protection IP67 (correctly plugged in and locked)
IP67, when in locked state
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)

M12
Standard designation M12 connector
Standards/specifications IEC 61076-2-101

Mounting type Front mounting M12 x 1