OV-24DC/480AC/5 - Semi-conductor relay

2982650

Solid-state relay, for signal amplification and isolation of the control and load circuits, can be plugged in the solderable plug-in bases SIM-AMS or with PCB connection for mounting directly onto the PCB, input: 4-32 V DC, output: 12-530 V AC/ 5 A

Product type Single solid-state relay
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics
Insulation Basic insulation

Test voltage (Input/output) 4 kV (50 Hz, 1 min., input/output)

Nominal input voltage UN 24 V DC
Input voltage range 4 V DC ... 32 V DC
Switching threshold "0" signal, voltage < 1.2 V DC
Switching threshold "1" signal voltage > 3.5 V DC
Typical input current at UN 10 mA
Typical response time ms (maximum ½ periods)
Typical turn-off time ms (maximum ½ periods)
Transmission frequency 25 Hz

Design of digital output electronic
Output voltage range 12 V AC ... 530 V AC (45/65 Hz)
Limiting continuous current 5 A (see derating curve)
Min. load current 20 mA
Leakage current < 1 mA
Surge current 80 A (tp = 20 ms)
Phase angle cos phi min 0.5
Max. load value 50 A2s
Peak offstate voltage 1000 V (Periodic peak reverse voltage)
Voltage drop at max. limiting continuous current 1.2 V
Output circuit 2-conductor

Dimensional drawing
Width 10.5 mm
Height 43 mm
Depth 25.4 mm

Color black (RAL 9005)

Ambient conditions
Ambient temperature (operation) -20 °C ... 70 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C

UKCA
Certificate UKCA-compliant

Standards/regulations EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 55011

Assembly instructions Can be aligned with > 20 mm spacing
Mounting position any