SACC-FS-4QO-0,34-M SCO - Connector

1521588

Connector, Universal, 4-position, Socket straight M12 SPEEDCON, coding: A, Insulation displacement connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 3.5 mm ... 6 mm

Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions AWG 20 conductor cross section upon request

Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 4
No. of cable outlets 1
Shielded no
Coding A
Cable outlet straight
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Dimensional drawing
Length 51 mm
Wrench size, union nut 13 mm
External dimensions
Outside diameter 3.5 mm ... 6 mm
Housing
Diameter housing 16.3 mm

Flammability rating according to UL 94 V0
Seal material NBR
Material of grip body PA 6
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material TPU
Material for screw connection Zinc die-cast, nickel-plated
Wire insulation material PVC / PE / PP / rubber

Conductor connection
Connection method Insulation displacement connection
Connection cross section 0.14 mm² ... 0.34 mm²
Connection cross section AWG 26 ... 22
Tightening torque 0.4 Nm (M12 knurl)
1.2 Nm (Pressure nut)
Pin assignment
Contact | Color (signal designation) | Contact (optional) 1 = BN
2 = WH
3 = BU
4 = BK

Rated surge voltage 2.5 kV
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 125 V AC
125 V DC
Nominal current IN 4 A

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Socket
Head cable outlet straight
Head thread type M12
Head locking type SPEEDCON
Coding A

Signal type/category Universal
External cable diameter 3.5 mm ... 6 mm

Ambient conditions
Degree of protection IP65
IP67
Ambient temperature (operation) -25 °C ... 80 °C (Plug / socket)
Ambient temperature (assembly) -5 °C ... 50 °C (During assembly)

Standard designation M12 connector
Standards/specifications according to IEC 61076-2-101