FL SFP SX2 - Media module

2702397

Gigabit SFP module for transmission up to 2 km with a wavelength of 1310 nm.

SFP module with a data transmission speed of 1000 Mbps, a wavelength of 1310 nm, and a maximum transmission length of 2 km.

Width 13.7 mm
Height 8.95 mm
Length 56.5 mm

Housing material Metal

Mounting type Insert in SFP slot

Ethernet FO
Connection method LC
Transmission speed 1 Gbps
Transmit capacity, minimum -15 dBm
Transmit capacity, maximum -1 dBm
Minimum receiver sensitivity -23 dBm
Maximum receiver sensitivity -3 dBm
Transmission physics multi-mode fiberglass
Transmission length 2 km (Fiberglass 50/125)
1 km (Fiberglass 62.5/125)
Wavelength 1310 nm
Signal LEDs depending on the Factoryline device
No. of channels 1 (LC multi-mode)
Transmit capacity, minimum -15 dBm
Transmit capacity, maximum -1 dBm
Minimum receiver sensitivity -3 dBm
Maximum receiver sensitivity -23 dBm
Transmission physics multi-mode fiberglass

Product type SFP module
Type Factoryline devices with SFP slot
MTTF 1862 Years (Telcordia SR-332, temperature factor at 40°C = 1, stress factor at 50% = 1, environmental factor = 1)
Format SFP (Small Form-factor Pluggable)

Status display via a Factoryline device

Maximum power dissipation for nominal condition 1 W
Transmission medium FO
Supply
Supply voltage 3.3 V (via Factoryline switch)
Power supply connection via SFP slot
Max. current consumption 300 mA
Current consumption 300 mA

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 75 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C (non-condensing)
Case temperature max. 85 °C (Operation)

Standard designation Laser equipment safety
Standards/specifications IEC 60825