IB IL 24 SEG-PAC - Segmentation module

2861344

Inline segment terminal block, complete with accessories (connector and labeling field), 24 V DC, without fuse

Width 12.2 mm
Height 119.8 mm
Depth 71.5 mm

Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Inline local bus
Number of interfaces 2
Connection method Inline data jumper
Transmission speed 500 kbps / 2 Mbps

Module
ID code (dec.) none
ID code (hex) none
Register length 0 Byte
Required parameter data 0 Byte
Required configuration data 0 Byte

Product type I/O component
Product family Inline
Type modular
Number of plugs 1
Insulation characteristics
Protection class III (IEC 61140, EN 61140, VDE 0140-1)

Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min.
24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min.
Protective circuit Overload protection; Fuse
Supply
I/O voltage 24 V DC
I/O voltage range 19.2 V DC ... 30 V DC
Residual ripple ± 1.2 V
Max. current consumption 6 A (8 A)
Potentials: Main circuit supply (UM)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 8 A (nominal value)
Potentials: Segment circuit supply (US)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)

Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
Inline connector
Connection method Spring-cage connection
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.)
Permissible humidity (storage/transport) 75 % ... 85 % (Slight temporary condensation may sometimes appear on the housing, e.g. when the terminal block is brought out of a vehicle into an enclosed room.)

Mounting type DIN rail mounting