SACC-M 8MS-4CON-M - Connector

1681169

Connector, Universal, 4-position, Plug straight M8, coding: A, Solder connection, knurl material: Brass, nickel-plated, external cable diameter 3.5 mm ... 5 mm

Assembly note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 4
No. of cable outlets 1
Shielded no
Coding A
Cable outlet straight
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Dimensional drawing
Length 45 mm
External dimensions
Outside diameter 3.5 mm ... 5 mm
Housing
Diameter housing 12 mm

Flammability rating according to UL 94 HB
Seal material NBR
Material of grip body PBT
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material for screw connection Brass, nickel-plated

Conductor connection
Connection method Solder connection
Connection cross section 0.08 mm² ... 0.25 mm² (flexible)
0.08 mm² ... 0.25 mm² (solid)
Connection cross section AWG 28 ... 24 (flexible)
28 ... 24 (solid)
Stripping length of the individual wire 3 mm
Tightening torque 0.2 Nm (M8 knurl)

Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V AC
30 V DC
Nominal current IN 4 A

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Plug
Head cable outlet straight
Head thread type M8
Coding A

Signal type/category Universal
Stripping length of the individual wire 3 mm

Ambient conditions
Degree of protection IP67
Ambient temperature (operation) -40 °C ... 85 °C

Standard designation M8 connector
Standards/specifications IEC 61076-2-104