EC-E4 4A - Electronic circuit breaker

0903035

Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 4 A

General When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor).
Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC).
Parallel connection of multiple circuit breakers is not permitted.

Product type Device circuit breakers
Product family EC-E
Type DIN rail module, one-piece
Number of positions 1
No. of channels 1
Insulation characteristics
Degree of pollution 2

Fuse type Automatic device
Switching capacity ICN Active current limitation
Fuse electronic
General
Operating voltage 24 V DC
18 V DC ... 32 V DC
Nominal current IN 4 A
Rated surge voltage 0.5 kV
Tripping method E (electronic)
Required backup fuse not required, integrated failsafe element
Dielectric strength max. 32 V DC (Load circuit)
Switch off Typ. 1.8 x IN
Active current limitation active
Fuse electronic
Closed-circuit current range I0 typ. 25 mA ±5 mA (When switched on)
MTBF (IEC 61709, SN 29500) 7430000 h (at 25 °C with 80 % load)
6590000 h (at 40 °C with 80 % load)
Voltage drop 100 mV (at IN)
Load circuit
Max. capacitive load 20000 µF
Auxiliary contact
Contact connection type floating signal contact
Minimum operating voltage Umin DC 10 V DC
Maximum operating voltage Umax DC 30 V DC
Minimum operating current Imin 10 mA
Max. operating current Imax 0.5 A
Indicator/remote signaling
Connection name Auxiliary contact
Switching function N/C contact

Nominal cross section 16.00 mm²
Line+ / LOAD+ /0V
Screw thread M4
Tightening torque ... 1.2 Nm
Stripping length 10 mm
Conductor cross section rigid 0.5 mm² ... 16 mm²
Cross section AWG 20 ... 6 (converted acc. to IEC)
Conductor cross section flexible 0.5 mm² ... 16 mm²
Conductor cross section, flexible [AWG] 20 ... 6 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve) 0.5 mm² ... 10 mm²
Flexible conductor cross section (ferrule with plastic sleeve) 0.5 mm² ... 10 mm²
2 conductors with same cross section, solid 0.5 mm² ... 4 mm²
2 conductors with the same cross-section AWG rigid 20 ... 12 (converted acc. to IEC)
2 conductors with same cross section, flexible 0.5 mm² ... 4 mm²
2 conductors with the same cross-section AWG flexible 20 ... 12 (converted acc. to IEC)
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.5 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 6 mm²
Nominal cross section 16 mm²
Auxiliary contact
Screw thread M3
Tightening torque ... 0.5 Nm
Stripping length 8 mm
Conductor cross-section flexible (ferrule without plastic sleeve) 0.25 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve) 0.25 mm² ... 2.5 mm²