PLC-OPT-110DC/110DC/3RW - Solid-state relay module

2900396

PLC-INTERFACE for railway applications, consisting of basic terminal block with push-in connection and integrated miniature solid-state relay, range: 0.7 x UN to 1.25 x UN, temperature range: -25°C to +70°C, 1 N/O contact, input: 110 V DC, output: 12 - 140 V DC/3 A

Product type Solid-state relay module
Product family PLC-INTERFACE
Application Railway applications
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics: Air clearances and creepage distances, input/output
Insulation Basic insulation
Overvoltage category III
Pollution degree 2

Maximum power dissipation for nominal condition 0.6 W
Test voltage (Input/output) 2.5 kV AC (Input/output)
Air clearances and creepage distances, input/output
Rated insulation voltage 160 V
Rated surge voltage 4 kV

Nominal input voltage UN 110 V DC
Input voltage range in reference to UN 0.7 ... 1.25 (t < 1 s = 0.6 ... 1.4 x UN)
Input voltage range 77 V DC ... 137.5 V DC
Switching threshold "0" signal in reference to UN < 0.3
Switching threshold "1" signal in reference to UN > 0.6
Typical input current at UN 5.5 mA
Typical response time 400 µs
Typical turn-off time 800 µs
Operating voltage display Yellow LED
Protective circuit Reverse polarity protection; Series polarity protection diode
Surge protection
Surge voltage protection > 150 V
Transmission frequency 50 Hz

Contact switching type 1 N/O contact
Design of digital output electronic
Output nominal voltage 110 V DC
Output voltage range 12 V DC ... 140 V DC (t < 1 s = 1.40 x UN)
Limiting continuous current 3 A (see derating curve)
Surge voltage protection > 150 V
Voltage drop at max. limiting continuous current < 150 mV
Output circuit 2-conductor, floating
Protective circuit Reverse polarity protection; Parallel polarity protection diode
Surge protection

Connection method Push-in connection
Stripping length 10 mm
Conductor cross section rigid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14

Width 6.2 mm
Height 80 mm
Depth 95 mm

Color gray (RAL 7042)
Flammability rating according to UL 94 V0 (Housing)

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

CE
Certificate CE-compliant
UKCA
Certificate UKCA-compliant
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Shipbuilding approval
Certificate TAE0000196
DNV GL data
Temperature D
Humidity A
Vibration B
EMC B
Enclosure Required protection according to the Rules shall be provided upon installation on board

Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive