FLKM-PA-D37/HW/DIO/C300 - Front adapter

2901423

VARIOFACE front adapter, for Honeywell C300, Series C I/O, maximum of 1x 16 channels can be connected (37-pos. D-SUB connector). Specifically for connecting digital, redundant I/O cards.

Product type Front adapter
Product family VARIOFACE
Insulation characteristics
Insulation Functional insulation
Insulation characteristics: Air clearances and creepage distances
Insulation Functional insulation
Overvoltage category II
Pollution degree 2

Operating voltage (AC) ≤ 30 V AC
Operating voltage (DC) ≤ 60 V DC
Current (per branch) ≤ 2 A
Air clearances and creepage distances
Rated insulation voltage 63 V
Rated surge voltage 0.6 kV (1.2/50 μs)
Supported controller HONEYWELL Experion PKS C300/C-Series
Suitable I/O card TDIL01 (non-redundant)
TDIL11 (redundant)
TDIL51 (non-redundant)
TDIL61 (redundant)
TDI110 (non-redundant)
TDI120 (redundant)
TDOB01 (non-redundant)
TDOB11 (redundant)
TDOB51 (non-redundant)
TDOB61 (redundant)
TAID01 (non-redundant)
TAID11 (redundant)
TAOX01 (non-redundant)
TAOX11 (redundant)
TAOX51 (non-redundant)
TAOX61 (redundant)
TAON01 (non-redundant)
TAON11 (redundant)

Connection 1 (control level)
Connection method Plug-in connection
Number of connections 2
Number of positions 16
Pitch 5.08 mm
Connection 2 (field level)
Connection in acc. with standard IEC 60807-2
Connection method D-SUB pin strip
Screw thread UNC 4-40
Number of connections 1
Number of positions 37
Insertion/withdrawal cycles > 500
Pitch 2.77 mm
Connection 3 (shield)
Connection method Spade connection
Number of positions 1
Note 2,8 x 0,8

Item dimensions
Width 93.8 mm
Height 28 mm
Depth 46.74 mm

Ambient conditions
Degree of protection (Module) IP00
Degree of protection (Installation location) ≥ IP54
Ambient temperature (operation) -20 °C ... 70 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C
Altitude ≤ 2000 m

Air clearances and creepage distances
Standards/regulations EN IEC 60664-1

Mounting type Plug-in mounting
Mounting position any

Notes on operation For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.