IB IL AI 2/SF-230-PAC - Analog module

2861577

Inline, Analog input terminal, Analog inputs: 2, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, 3 dB base frequency at 230 Hz, degree of protection: IP20, including Inline connector and labeling field

Width 12.2 mm
Height 136.8 mm
Depth 71.5 mm
Note on dimensions Housing dimensions

Inline local bus
Number of interfaces 2
Connection method Inline data jumper
Transmission speed 500 kbps

Module
ID code (dec.) 127
ID code (hex) 7F
Length code (hex) 02
Length code (dec) 02
Process data channel 32 bit
Input address area 4 Byte
Output address area 4 Byte
Register length 32 bit
Required parameter data 6 Byte
Required configuration data 4 Byte

Analog: General
Input name Analog inputs
Description of the input Single-ended inputs, voltage or current
Number of inputs 2
A/D conversion time typ. 120 µs (per channel)
Connection method Inline shield connector
Connection technology 2-conductor
Note regarding the connection technology shielded
Current input signal 0 mA ... 20 mA
4 mA ... 20 mA
-20 mA ... 20 mA
Input resistance current input 50 Ω (Shunt)
Voltage input signal 0 V ... 10 V
-10 V ... 10 V
Input resistance of voltage input > 220 kΩ
Data formats IB IL, IB ST, IB RT, standardized representation
Limit frequency (3 dB) 230 Hz
Common mode voltage range signal - ground 40 V (Between current input and functional ground)
40 V (between voltage input and functional ground)
Measuring principle Successive approximation
Measured value resolution 16 bits (15 bits + sign bit)
Measured value representation 16 bit two's complement
Protective circuit Surge protection; Suppressor diodes in the analog inputs

Product type I/O component
Product family Inline
Type modular
Scope of delivery including Inline connector and labeling field
Operating mode Process data operation with 2 words
Special properties 3 dB base frequency at 230 Hz
Diagnostics messages Failure of the internal I/O supply yes
I/O error Error message in the process data
User error Error message in the process data
Insulation characteristics
Overvoltage category II (IEC 60664-1, EN 60664-1)
Pollution degree 2 (IEC 60664-1, EN 60664-1)

Potentials
Power consumption typ. 662 mW
max. 882 mW
Potentials: Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current draw max. 60 mA
typ. 45 mA
Potentials: Supply of analog modules (UANA)
Supply voltage 24 V DC (via voltage jumper)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 18 mA
typ. 13 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / I/O 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: I/O/functional ground 500 V AC, 50 Hz, 1 min.

Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
Inline connector
Connection method Spring-cage connection
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm