SACC-DSI-MSB-5CON-M12-SCO SH - Device connector rear mounting

1552971

Device connector rear mounting, 5-position, Pin, straight, M12-SPEEDCON, coding: B, Rear mounting, M12 x 1, Solder pins, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1240022

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information: Lock nut is included in the scope of delivery

Mounting type Rear mounting M12 x 1 With flat nut
Assembly instructions With flat nut

Product type Circular connectors (device side)
Number of positions 5
Shielded yes
Coding B
Thread type M12
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Flammability rating according to UL 94 V0
Seal material NBR
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material for screw connection Zinc die-cast, nickel-plated

Rated surge voltage 1.5 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 60 V
Nominal current IN 4 A

Conductor connection
Connection method Solder pins
Contact connection type Pin
Tightening torque 3 Nm ... 4 Nm (Installation-side)

Mechanical data
Insertion/withdrawal cycles > 100

Connection 1
Head design Pin
Head cable outlet straight
Head thread type M12
Head locking type SPEEDCON
Coding B

Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)

Ambient conditions
Degree of protection IP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)

M12
Standard designation M12 connector
Standards/specifications IEC 61076-2-101