PSI-MOS-DNET CAN/FO 660/BM - FO converters

2708054

FO converter with integrated optical diagnostics, for DeviceNet™, CAN, CANopen® up to 800 kbps, basic module, interfaces: 1 x CAN, 1 x alarm, 1 x FO (FSMA), 660 nm, for polymer/PCF fiberglass cable

The PSI-MOS-DNET... fiber optic transmission system enables DeviceNet™ and CANopen® users to benefit from simple and interference-free networking based on fiber optics. In addition, bus cable short circuits only affect the specific potential segment concerned. This increases overall availability, and improves flexibility when designing the bus topology. The use of fiber optic technology enables branch lines and star and tree structures to be created. The 22.5 mm space-saving devices from the PSI-MOS-DNET CAN/FO... series feature an internal backplane. The maximum network expansion that can be achieved (sum total of copper and fiber optic cables) essentially depends on the data rate used.

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Product type Media converter
Application Base module
MTBF 409 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
82 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))

Electrical isolation VCC // CAN
Maximum power dissipation for nominal condition 2 W
Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
Supply
Supply voltage range 10 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
Nominal supply voltage 24 V DC (in acc. with UL)
Typical current consumption 100 mA (24 V DC)
Max. current consumption 100 mA

Switching
Output name Relay output
Output description Alarm output
Number of outputs 1
Maximum switching voltage 60 V DC
42 V AC
Limiting continuous current 0.46 A

Supply
Connection method Pluggable COMBICON screw terminal block through basic module
Tightening torque 0.56 Nm ... 0.79 Nm

Bit distortion, input ± 35 % (permitted)
Bit distortion, output < 6.25 %
Signal CAN
CANopen®
DeviceNet™
Data: optical FO
Transmit capacity, minimum -6.2 dBm (980/1000 µm)
-16.9 dBm (200/230 µm)
Transmission length incl. 3 dB system reserve 100 m (F-P 980/1000 230 dB/km with quick mounting connector)
800 m (F-K 200/230 10 dB/km with quick mounting connector)
Connection method F-SMA
Wavelength 660 nm
Minimum receiver sensitivity -30.2 dBm
Transmission medium Polymer fiber
PCF fiber
Data: CAN interface, in accordance with ISO/IS 11898 for DeviceNet™, CAN, CANopen®
Serial transmission speed ≤ 800 kbps
Connection method Pluggable screw connection
Transmission length ≤ 5000 m (Dependent on the data rate and the protocol used)
Termination resistor 120 Ω (Can be connected)
Transmission medium Copper
File format/coding Bit stuffing, NRZ

Width 22.5 mm
Height 99 mm
Depth 114.5 mm

Color (Housing) green (RAL 6021)
Material (Housing) PA 6.6-FR