FL SWITCH 1000T-2POE-GT-2SFP - Industrial Ethernet Switch

1026765

Unmanaged PoE Switches 1000, 2 SFP ports 100/1000 Mbps, 2 RJ45 ports 10/100/1000 Mbps

Width 42.8 mm
Height 100 mm
Depth 101 mm

Notes on operation Designed to function with all 48 V DC QUINT and TRIO power supplies.
Notes on operation Mode A PoE
Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Mounting type DIN rail mounting

Fiber optic interface
Connection method SFP
Transmission speed 100/1000 Mbps (full duplex)
Transmission physics Depending on the SFP module
Transmission length up to 80 km (Depending on the fiber/SFP module used)
No. of channels 2 (SFP ports)
Ethernet (PoE)
Number of interfaces 2
Connection method RJ45
Transmission speed 10/100/1000 Mbps
Transmission physics Ethernet RJ45
Transmission length 100 m (Between transmitter / receiver)
Signal LEDs LNK/ACT, POE
No. of channels 2 (RJ45 ports)

Product type Switch
Product family Unmanaged PoE Switches 1000
Type Stand-Alone
MTTF 45.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Switch functions
Basic functions Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact
Signal contact control voltage 48 V DC
Signal contact control current 0.5 A
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port
Additional functions Autonegotiation
Security functions
Basic functions Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact

Local diagnostics US1, US2 Supply voltage Green LED
PoE PoE detection Orange LED
LNK/ACT Link status/data transmission Green/orange LED
Alarm Power failure at US1 or US2/Link failure
Supply
Supply voltage (DC) 55 V DC (redundant)
Supply voltage range 52 V DC ... 57 V DC (>52 V DC for PoE+ recommended)
Power supply connection Via COMBICON, max. conductor cross section 2.5 mm²
Inrush current 25.7 A (52 V DC for 1950 μs)
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 1.2 A (Maximum, nominal load)
Typical current consumption 80 mA (at US = 55 V DC)
Function
Signal contact control voltage 48 V DC
Signal contact control current 0.5 A

Connection technology
Connection name Power supply
pluggable yes
Power supply
Connection method Screw connection
Conductor cross section, rigid 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12
Stripping length 7 mm

Ambient conditions
Degree of protection IP30
Ambient temperature (operation) -40 °C ... 75 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Air pressure (storage/transport) 57 kPa ... 108 kPa (up to 4850 m above mean sea level)

Standards/specifications EN 50121 for railway applications