FL SWITCH 4000T-4POE-SFP - Industrial Ethernet Switch

1026924

Managed PoE Switches 4000, 1 SFP port 100/1000 Mbps, 4 RJ45 ports 10/100 Mbps

FL SWITCH 4000 managed industrial PoE Ethernet switches combine Gigabit interfaces with extensive network performance for the most demanding applications. Extensive user and device access control security features with complete IEEE redundancy and 15 ms recovery time extended ring redundancy optimize network uptime. POE control is optimized with POE diagnostics, watchdog, and scheduling, functions. A comprehensive mix of 10/100 Mbps and Gigabit fiber optic connections combine performance with installed cost savings.

Width 75 mm
Height 170 mm
Depth 152 mm

Notes on operation Designed to function with all 48 V DC QUINT and TRIO power supplies.
Notes on operation Mode A or Mode B PoE
Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Aluminum

Mounting type DIN rail mounting

Ethernet (SFP)
Number of interfaces 1
Connection method SFP
Transmission speed 100/1000 Mbps (full duplex)
Transmission physics Depending on the SFP module
Transmission length up to 80 km (Depending on the fiber/SFP module used)
Signal LEDs Data receive, link status
No. of channels 1 (SFP port)
Ethernet (PoE)
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Ethernet in RJ45 twisted pair
Transmission length 100 m
No. of channels 4 (RJ45 ports)

Product type Switch
Product family Managed PoE Switches 4000
Type Block design
MTTF 21.3 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Switch functions
Diagnostic functions RMON History
LLDP (Link Layer Discovery Protocol)
SNMP-Traps
N:1-Portmirroring
Basic functions Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts, Modbus/TCP, PoE according to IEEE 802.3at/af.
Filter functions Quality of Service (8 and 64 priority classes)
Port prioritization
VLAN (up to 64 VLANs)
IGMP Snooping (256 groups)
IGMP Query
IP parameterization DHCP-Client
BootP
Management Web-based management (HTTP/HTTPS)
SNMPv1/v2/v3
Redundancy ERR (Extended ring redundancy (15 ms))
RSTP (Rapid Spanning Tree Protocol)
MSTP (Multiple Spanning Tree Protocol)
Status and diagnostic indicators LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port
Additional functions Transmission of MMS and GOOSE (IEC 61850-8-1)
Time synchronization SNTP (Simple Network Time Protocol)
Security functions
Basic functions Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts, Modbus/TCP, PoE according to IEEE 802.3at/af.

Local diagnostics US1, US2 Supply voltage Green LED
LNK/ACT Link status/data transmission Green LED
PoE PoE detection Orange LED
Alarm Power failure at US1 or US2/Link failure
Transmission medium Copper
FO
Supply
Supply voltage (DC) 55 V DC (redundant)
Supply voltage range 52 V DC ... 57 V DC (> 52 V DC for PoE+ or 60 W output recommended)
Inrush current 43.6 A (52 V DC for 1830 μs)
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 3.9 A (Maximum, nominal load)
Typical current consumption 142 mA (US = 55 V DC)

Connection technology
Connection name Power supply
pluggable yes