FLKM 50-PA-S400 - Front adapter

2294500

VARIOFACE front adapter, for Siemens SIMATIC® S7-400, 1x 32 channels can be connected

Product type Front adapter
Product family VARIOFACE
Insulation characteristics
Insulation Functional insulation
Insulation characteristics: Air clearances and creepage distances
Insulation Functional insulation
Overvoltage category II
Pollution degree 2

Operating voltage (AC) ≤ 30 V AC
Operating voltage (DC) ≤ 60 V DC
Nominal operating mode 100% operating factor
Current (per branch) ≤ 1 A
Current (Voltage supply via IDC/FLK) ≤ 2 A
Current (Voltage supply via spade connection) ≤ 8 A
Air clearances and creepage distances
Rated insulation voltage 63 V
Rated surge voltage 0.6 kV (1.2/50 μs)
Supported controller SIEMENS S7-400
Suitable I/O card 6ES7421-1BL01-0AA0
6ES7422-1BL00-0AA0
6ES7422-7BL00-0AB0
Supported controller SIEMENS S7-400
Note Only in conjunction with
VIP-2/SC/FLK50/S7/A-S400, Item No. 2322359
VIP-2/PT/FLK50/S7/A-S400, Item No. 2904289
all DR wire bridges on the adapter must be disconnected.
Suitable I/O card 6ES7421-7BH01-0AB0
6ES7421-7DH00-0AA0

Connection 1 (control level)
Connection method Plug-in connection
Number of positions 48
Connection 2 (field level)
Connection in acc. with standard IEC 60603-13
Connection method IDC/FLK pin strip
Number of connections 1
Number of positions 50
Insertion/withdrawal cycles > 50
Pitch 2.54 mm
Connection 3 (supply)
Connection method Spade connection
Number of positions 5
Note 2,8 x 0,8

Item dimensions
Width 24.2 mm
Height 273.5 mm
Depth 67.6 mm

Ambient conditions
Degree of protection (Module) IP00
Degree of protection (Installation location) ≥ IP54
Ambient temperature (operation) -20 °C ... 50 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C
Altitude ≤ 2000 m

Air clearances and creepage distances
Standards/regulations EN IEC 60664-1

Mounting type Plug-in mounting
Mounting position any

Notes on operation For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Notes on operation For I/O cards 6ES7 421-1BL01-0AA0, 6ES7 422-1BL00-0AA0, and 6ES7 422-7BL00-0AB0:
Thanks to the wire bridges that are supplied as standard, the input and output bytes are non-isolated.
Notes on operation For I/O cards 6ES7 421-7BH01-0AB0 and 6ES7 421-7DH00-0AB0:
Only operate in conjunction with VIP-2/SC/FLK50/S7/A-S400 (Item No. 2322359) or VIP-2/PT/FLK50/S7/A-S400 (Item No. 2904289).
All wire bridges on the adapter must be disconnected.