OPT- 5DC/ 24DC/ 5 - Miniature solid-state relay

2982113

Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 5 V DC, output: 3 - 33 V DC/5 A

Product type Single solid-state relay
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics: Standards/regulations
Insulation Basic insulation
Overvoltage category III
Pollution degree 2

Maximum power dissipation for nominal condition 0.05 W
Test voltage (Input/output) 2.5 kV (50 Hz, 1 min., input/output)
Standards/regulations
Rated insulation voltage 100 V DC

Nominal input voltage UN 5 V DC
Input voltage range in reference to UN 0.8 ... 1.2
Input voltage range 4 V DC ... 6 V DC
Switching threshold "0" signal, voltage ≤ 0.8 V
Switching threshold "1" signal voltage ≥ 2.5 V
Typical input current at UN 9 mA
Typical response time 10 µs
Typical turn-off time 400 µs
Protective circuit Reverse polarity protection; Polarity protection diode
Transmission frequency 300 Hz

Contact switching type 1 N/O contact
Design of digital output electronic
Output nominal voltage 24 V DC
Output voltage range 3 V DC ... 33 V DC
Limiting continuous current 5 A (see derating curve)
Maximum inrush current 15 A (10 ms)
Surge voltage protection > 33 V DC
Voltage drop at max. limiting continuous current ≤ 200 mV
Output circuit 2-conductor, floating
Protective circuit Reverse polarity protection; Polarity protection diode
Surge protection

Dimensional drawing
Width 12.7 mm
Height 29 mm
Depth 15.7 mm

Color black (RAL 9005)
Flammability rating according to UL 94 V0 (Housing)

Ambient conditions
Degree of protection RT III
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -25 °C ... 70 °C

Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Standards/regulations
Standards/regulations IEC 60664
EN 50178

Assembly note in rows with zero spacing
Mounting position any