SACC-DSI-M8MS-8CON-M8/0,5 - Device connector rear mounting

1424230

Device connector rear mounting, 8-position, Pin, straight, M8, Rear mounting, M8 x 1, Individual wires, cable length: 0.5 m, 0.14 mm2, PVC litz wire

Mounting type Rear mounting M8 x 1 With flat nut
Assembly note With flat nut

Product type Circular connectors (device side)
Number of positions 8
No. of cable outlets 1
Shielded no
Coding A
Thread type M8
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Flammability rating according to UL 94 HB
Seal material FKM
Contact material Cu alloy
Contact surface material Au
Contact carrier material PUR/PA 6.6
Material for screw connection Zinc die-cast, nickel-plated
Conductor material Tin-plated Cu litz wires

Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V AC
30 V DC
Nominal current IN 1.5 A
Max. conductor resistance 80 Ω/km

Conductor connection
Connection method Individual wires
Contact connection type Pin
Conductor cross section 0.14 mm²
Tightening torque 1 Nm ... 1.5 Nm (Installation-side)

Connection 1
Head design Pin
Head cable outlet straight
Head thread type M8

Cable length 0.5 m
Cable type PVC litz wire
Wire diameter incl. insulation 1.3 mm ±0.1 mm
Single wire, color white, brown, green, yellow, gray, pink, blue, red
Cable cross section 0.14 mm²
Conductor material Tin-plated Cu litz wires
Conductor structure signal line 7x 0.16 mm
AWG signal line 26
Material wire insulation PVC / UL
Thickness, insulation 0.38 mm
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Cable resistance ≥ 80 Ω/km
Cable insulation resistance ≥ 20 MΩ*km
Ambient temperature (operation) -40 °C ... 105 °C (cable, fixed installation)
-10 °C ... 105 °C (Cable, flexible installation)

Ambient conditions
Degree of protection IP67
IP67
Ambient temperature (operation) -25 °C ... 85 °C (Plug)
-40 °C ... 105 °C (cable, fixed installation)
-10 °C ... 105 °C (Cable, flexible installation)

M8
Standard designation M8 connector
Standards/specifications IEC 61076-2-104