PLC-OSC- 24DC/ 24DC/ 3RW - Solid-state relay module

2980610

PLC-INTERFACE for railway applications, consisting of basic terminal block with screw connection and integrated miniature solid-state relay, range: 0.7 x UN to 1.25 x UN, temperature range: -25°C to +70°C, 1 N/O contact, input: 24 V DC, output: 3 - 33 V DC/3 A

Product type Solid-state relay module
Product family PLC-INTERFACE
Application Railway applications
Insulation characteristics: Standards/regulations
Overvoltage category III
Pollution degree 2

Maximum power dissipation for nominal condition 0.2 W

Nominal input voltage UN 24 V DC
Input voltage range in reference to UN 0.7 ... 1.25
Input voltage range 16.8 V DC ... 30 V DC
Switching threshold "0" signal in reference to UN ≤ 0.3
Switching threshold "1" signal in reference to UN ≥ 0.6
Typical input current at UN 8.5 mA
Typical response time 40 µs
Typical turn-off time 200 µs
Status display Yellow LED
Protective circuit Reverse polarity protection; Polarity protection diode
Transmission frequency 300 Hz

Contact switching type 1 N/O contact
Design of digital output electronic
Output voltage range 3 V DC ... 33 V DC
Limiting continuous current 3 A
Voltage drop at max. limiting continuous current ≤ 200 mV
Output circuit 2-conductor, floating
Protective circuit Reverse polarity protection; Polarity protection diode
Surge protection

Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section rigid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14
Tightening torque 0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))

Width 6.2 mm
Height 80 mm
Depth 95 mm

Color gray (RAL 7042)
Flammability rating according to UL 94 V0 (Housing)

Ambient conditions
Ambient temperature (operation) -25 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

CE
Certificate CE-compliant
UKCA
Certificate UKCA-compliant
Shipbuilding approval
Certificate TAE0000196
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60
DNV GL data
Temperature D
Humidity A
Vibration B/C
EMC B
Enclosure Required protection according to the Rules shall be provided upon installation on board

Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive

Standards/regulations
Standards/regulations IEC 60947-5-1
DIN EN 50155/VDE 0115-200 (in relevant parts)

Mounting type DIN rail mounting
Assembly note in rows with zero spacing
Mounting position any