FLKM 14-PA-S300 - Front adapter

2299770

VARIOFACE front adapter, for SIMATIC S 7-300, 2 x 8 channels can be connected.

Product type Front adapter
Product family VARIOFACE
Insulation characteristics
Insulation Functional insulation
Insulation characteristics: Air clearances and creepage distances
Insulation Functional insulation
Overvoltage category II
Pollution degree 2

Operating voltage (AC) ≤ 30 V AC
Operating voltage (DC) ≤ 60 V DC
Nominal operating mode 100% operating factor
Current (per branch) ≤ 1 A
Current (Voltage supply via IDC/FLK) ≤ 2 A
Current (Voltage supply via spade connection) ≤ 8 A
Air clearances and creepage distances
Rated insulation voltage 63 V
Rated surge voltage 0.6 kV (1.2/50 μs)
Supported controller SIEMENS S7-300 / ET 200 M
Suitable I/O card 6ES7321-1BH50-0AA0
6ES7321-7BH01-0AB0
6ES7321-1BH02-0AA0
6ES7321-1BH10-0AA0
6ES7322-1BH01-0AA0
6ES7322-1BH10-0AA0
6ES7322-8BF00-0AB0
6ES7323-1BH01-0AA0
6ES7331-7HF01-0AB0
6ES7331-7KF02-0AB0
6ES7331-7KB02-0AB0
6ES7331-7TF01-0AB0
6ES7332-5HD01-0AB0
6ES7332-5HB01-0AB0
6ES7332-7ND02-0AB0
6ES7332-8TF01-0AB0
6ES7334-0CE01-0AA0
6ES7334-0KE00-0AB0
6ES7335-7HG01-0AB0
6ES7338-4BC01-0AB0
6ES7350-1AH03-0AE0
6ES7351-1AH01-0AE0
6ES7352-1AH02-0AE0
6ES7353-1AH01-0AE0
6ES7354-1AH01-0AE0
6ES7355-0VH10-0AE0
6ES7355-1VH10-0AE0

Connection 1 (control level)
Connection method Plug-in connection
Number of positions 20
Connection 2 (field level)
Connection in acc. with standard IEC 60603-13
Connection method IDC/FLK pin strip
Number of connections 2
Number of positions 14
Insertion/withdrawal cycles > 50
Pitch 2.54 mm
Connection 3 (supply)
Connection method Spade connection
Number of positions 4
Note 2,8 x 0,8

Item dimensions
Width 22.5 mm
Height 117 mm
Depth 19.39 mm

Ambient conditions
Degree of protection (Module) IP00
Degree of protection (Installation location) ≥ IP54
Ambient temperature (operation) -20 °C ... 50 °C
Ambient temperature (storage/transport) -20 °C ... 50 °C
Altitude ≤ 2000 m

Air clearances and creepage distances
Standards/regulations EN IEC 60664-1

Mounting type Plug-in mounting
Mounting position any

Notes on operation For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Notes on operation To prevent short circuits, all wire bridges on the following I/O cards are to be separated.
There may not be any voltage supply at the front adapter.
6ES7 321-1BH50-0AA0
6ES7 321-7BH01-0AB0
6ES7 322-8BF00-0AB0
6ES7 331-7KF02-0AB0
6ES7 331-7HF01-0AB0
6ES7 331-7KB02-0AB0
6ES7 331-7TF01-0AB0
6ES7 332-5HD01-0AB0
6ES7 332-5HB01-0AB0
6ES7 332-7ND02-0AB0
6ES7 334-0CE01-0AA0
6ES7 334-0KE00-0AB0
6ES7 335-7HG01-0AB0
6ES7 338-4BC01-0AB0
6ES7 350-1AH03-0AE0
6ES7 351-1AH01-0AE0
6ES7 352-1AH02-0AE0
6ES7 353-1AH01-0AE0
6ES7 354-1AH01-0AE0
6ES7 355-0VH10-0AE0
6ES7 355-1VH10-0AE0