SACC-M 8MS-4PCON - Connector

1506765

Connector, Universal, 4-position, Plug straight M8, coding: A, Piercecon® fast connection, knurl material: Brass, nickel-plated, external cable diameter 3 mm ... 5 mm

Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 4
No. of cable outlets 1
Shielded no
Coding A
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Dimensional drawing
Length 35.4 mm
Wrench size, union nut 11 mm
External dimensions
Outside diameter 3 mm ... 5 mm
Housing
Diameter housing 12 mm

Flammability rating according to UL 94 V0
Seal material NBR
Material of grip body PA 6.6
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material for screw connection Brass, nickel-plated

Conductor connection
Connection method Piercecon® fast connection
Connection cross section 0.14 mm² ... 0.38 mm² (flexible)
Connection cross section AWG 22 ... 26 (flexible)
Tightening torque 0.5 Nm (Pressure nut with coupling sleeve)
0.8 Nm (Connector with coupling sleeve)
0.2 Nm (M8 knurl)
Pin assignment
Contact | Color (signal designation) | Contact (optional) 1 = BN
3 = BU
4 = BK

Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V AC
30 V DC
Nominal current IN 4 A

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Plug
Head cable outlet straight
Head thread type M8
Coding A

Signal type/category Universal

Ambient conditions
Degree of protection IP68
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)

M8
Standard designation M8 connector
Standards/specifications IEC 61076-2-104