PP-RJ-RJ - Patch panel

2703015

Patch panel, two RJ45 jacks, CAT6, 10/100/1000 Mbps, DIN rail adapter, IP20

Ethernet patch panels enable quick and easy connection between the field cabling and control cabinet cabling. The passive termination panels are a convenient alternative to the on-site assembly of RJ45 connectors.

Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Product type Patch panel
MTTF 105699 Years
Insulation characteristics
Overvoltage category II
Pollution degree 2

Maximum power dissipation for nominal condition 0 W (passive module, no supply voltage required)
Rated insulation voltage 85 V DC (In accordance with EN/IEC 60079-7, Annex H)

Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Serial transmission speed 10/100/1000 Mbps
Frequency range 250 MHz
Connection method RJ45 jack
Note on the connection method CAT6
Pin assignment 1:1
Transmission length 100 m (including patch cables)
Transmission medium Copper
Output nominal voltage < 57 V DC
Maximum output power 60 W
Maximum output current 725 mA (Per channel)
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Connection method RJ45 jack

Dimensional drawing
Width 23.8 mm
Height 101.3 mm
Depth 50 mm

Color (Housing) light grey (RAL 7035)
Material (Housing) Plastic
Flammability rating according to UL 94 V0

Ambient conditions
Degree of protection IP20 (Manufacturer's declaration)
Ambient temperature (operation) -40 °C ... 75 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
≤ 2000 m (Restrictions for ATEX applications)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)

CE
Certificate CE-compliant
ATEX
Identification  II 3 G Ex ec IIC Gc
Certificate PxCIF18ATEX2703015U
Note Please follow the special installation instructions in the documentation!
UKEX
Identification  II 3 G Ex ec IIC Gc
Certificate PxCIMA22UKEX2703015U
UL, USA
Certificate UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, Canada
Certificate CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A
Shipbuilding
Identification DNV GL
DNV GL data
Temperature D
Humidity B
Vibration B
EMC B

Mounting type DIN rail mounting, stationary
Assembly note The product can be snapped onto all 35 mm DIN rails in accordance with EN 60715.