CABLE-D-15SUB/M/OE/0,25/S/2,0M - Cable

2926467

Assembled shielded round cable; connection 1: Single wires (15-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB pin strip (1x 15-position); cable length: 2 m

Product type System cable

Ambient conditions
Degree of protection IP20
Degree of protection (Installation location) ≥ IP54 (Installation location)
Ambient temperature (operation) -40 °C ... 70 °C (fixed installation)
-10 °C ... 70 °C (flexible installation)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude ≤ 2000 m

Operating voltage (AC) ≤ 30 V AC
Operating voltage (DC) ≤ 60 V DC
Nominal operating mode 100% operating factor
Current (Per path) ≤ 2 A (Uncoiled, see derating)

Cable length 2 m
15X0.25 [PVC]
Number of positions 15
Shielded yes
Cable type 15X0.25 [PVC]
Conductor type Assembled shielded round cable
Conductor structure signal line 14x 0.15 mm
AWG signal line 24
Conductor cross section 15x 0.25 mm²
Wire diameter incl. insulation 1.2 mm ±0.05 mm
External cable diameter 7.90 mm ±0.5 mm
Outer sheath, material Semi-rigid PVC
External sheath, color gray
Conductor material Bare Cu litz wires
Cable resistance ≤ 80 Ω/km (at 20 °C)
Insulation resistance ≥ 20 MΩ*km (at 20 °C)
Smallest bending radius, fixed installation 67 mm
Smallest bending radius, movable installation 126 mm
Max. bending cycles 5000 (at a radius of ≥ 15x outside diameter)
Halogen-free no
Flame resistance IEC 60332-1-2 (raw cable)
VDE 0842, Part 332-1-2 (raw cable)
IEC 60332-3-22 (raw cable)
UL VW-1
CSA FT-1
Resistance to oil can withstand occasional splashes (raw cable)
D-SUB15 (1) () = white
D-SUB15 (2) () = brown
D-SUB15 (3) () = green
D-SUB15 (4) () = yellow
D-SUB15 (5) () = gray
D-SUB15 (6) () = pink
D-SUB15 (7) () = blue
D-SUB15 (8) () = red
D-SUB15 (9) () = black
D-SUB15 (10) () = violet
D-SUB15 (11) () = gray-pink
D-SUB15 (12) () = red-blue
D-SUB15 (13) () = white-green
D-SUB15 (14) () = brown-green
D-SUB15 (15) () = white-yellow

Connection 1
Connection method Single wires
Stripping length (Sheath)  150 mm
Number of positions 15
Note The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.
Connection 2
Connection in acc. with standard IEC 60807-2
DIN 41652
Connection method D-SUB pin strip
Screw thread UNC 4-40
Number of connections 1
Number of positions 15
Tightening torque 0.2 Nm
Insertion/withdrawal cycles > 200
Pitch 2.74 mm

Notes on operation No additional touch protection is required when using a SELV/PELV voltage (≤30 V AC or 60 V DC).
Notes on operation For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.