Company: | 上海当临自动化科技有限公司 |
Location: | China - Shanghai,上海市青浦区练西公路2850号1幢 |
Price: | Negotiation |
Contact: | Jason(Manager) |
Contact Me: |
Tell:+86-19921425125 Mobile:+86-19921425125 Email:77151212443684098841255213@q9q11.1110co9m |
PSR-SCP- 24DC TS S - Safety module
PSR-SCP- 24DC/TS/S - Safety module
2986229
Freely configurable safety module with 20 safe inputs and 4 safe outputs; 4 alarm, 2 clock, and 2 ground switching outputs; diagnostics possible via bus gateways, up to SIL 3, Cat.4/PL e, SIL 3, EN 50156, plug-in screw connection terminal blocks
Product type Safety device
Application Emergency stop
Light grid
Safety door
Two-hand control
Number of possible extension modules 1 (max. continuous current via PSR-TBUS: 4 A)
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category III
Pollution degree 2
Times
Response time max. 30 ms (plus response time of PSR-TS-SDOR4)
Recovery time < 10 s
Maximum power dissipation for nominal condition 6372 mW (at a = 20, b = 2, c = 4, e = 2, Iclock = 100 mA, Isignal = 100 mA, IOut/GND = 2 A, IOut/Out = 2 A)
Nominal operating mode 100% operating factor
Interfaces USB
DIN rail TBUS for extension modules and bus couplers
Supply
Rated control circuit supply voltage US 18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
Rated control circuit supply voltage US 24 V DC (A1/A2)
Rated control supply current IS typ. 110 mA
Limiting continuous current max. 6 A (For looped-through current paths A1/A1 and A2/A2)
Filter time typ. 20 ms (Load-dependent, in the event of voltage dips at US)
Protective circuit Yes, within the scope of the operating voltage limits
Status display 3x LED green, 1x LED red
Digital
Description of the input Digital, type HTL
Number of inputs 10 (Two-channel, up to SIL 3)
20 (Single-channel, up to SIL 2)
Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off)
Input voltage range "1" signal 11 V DC ... 30 V DC
Cable length max. 2000 m
Status display 20 x LED green (1 LED per input)
Current consumption typ. 4 mA
Digital
Number of outputs 4 (Safe semiconductor outputs, up to Cat. 4 in accordance with EN ISO 13849-1)
2 (Ground switching outputs)
Note on protection circuit Yes, within the scope of the operating voltage limits
Short-circuit protection Yes
Output voltage < 5 V (Low state)
Leakage current max. 2 mA
Max. capacitive load max. 1 µF (Electronic components)
Max. inductive load See "Protective circuit"
Limiting continuous current 2 A (Per channel, see Derating)
2 A (Total current of all outputs)
Nominal output voltage 24 V DC (Supply via 24 V/0 V)
Nominal output voltage range 18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
Status display 4 x LED green (1 LED per output)
Test pulses < 1 ms
Signal
Output description Digital
Number of outputs 4
Voltage 24 V DC (Supply via 24 V/0 V)
Limiting continuous current 100 mA
Short-circuit protection Yes
Clock
Output description Digital
Number of outputs 2
Voltage 24 V DC (Supply via 24 V/0 V)
Limiting continuous current 100 mA
Test pulses < 1 ms
Short-circuit protection Yes
Connection technology
pluggable yes
Conductor connection
Connection method Screw connection
Conductor cross section rigid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross-section AWG 24 ... 12
Stripping length 7 mm
Screw thread M3
Tightening torque 0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
Width 67.5 mm
Height 99 mm
Depth 114.5 mm
Color yellow
Housing material Polyamide PA non-reinforced
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- Crane weighing scale for heavy loads equipmentMultiple Units : These scales can display weight measurements in various units , such as kilograms , pounds , ounces , or newtons , depending on the scale" "
- 833140N Digital Hang LED Scale Hanging Crane ScaleDigital Display : Most crane scales are equipped with a digital display that provides real-time weight readings ." "
- Rhorawill Crane Scale 300kgs Double Accuracy ElectronicCrane weighing scales , also known as crane scales or crane load cells , are specialized weighing devices designed for the purpose of lifting and weighing" "
- OCS-T-300kg Digital Hanging ScaleLCD digital crane mini hanging scale for commercial use The mini hanging scale features a die-cast aluminum casing for added strength ." "