CABLE-FLK14/OE/0,14/ 100 - Cable

2305253

Round cable set; connection 1: Single wires (14-position) (The wires are marked and fitted with ferrules); connection 2: IDC/FLK socket strip (1x 14-position); cable length: 1 m

Product type System cable

Ambient conditions
Degree of protection IP00
Degree of protection (Installation location) ≥ IP54 (Installation location)
Ambient temperature (operation) -40 °C ... 70 °C (fixed installation)
-10 °C ... 70 °C (flexible installation)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude ≤ 2000 m

Operating voltage (AC) ≤ 30 V AC
Operating voltage (DC) ≤ 60 V DC
Nominal operating mode 100% operating factor
Current (Per path, 50°C) ≤ 1 A (Uncoiled, see derating)
Current (Per path, 70°C) ≤ 0.6 A (Uncoiled, see derating)

Cable length 1 m
14X0.14 [PVC]
UL AWM Style 2464/1061
Number of positions 14
Shielded no
Cable type 14X0.14 [PVC]
Conductor type Round cable set
Conductor structure signal line 7x 0.16 mm
AWG signal line 26
Conductor cross section 14x 0.14 mm²
Wire diameter incl. insulation 1 mm ±0.03 mm
External cable diameter 6.40 mm ±0.4 mm
Outer sheath, material Semi-rigid PVC
External sheath, color gray
Conductor material Tin-plated Cu litz wires
Cable resistance ≤ 145 Ω/km (20 °C)
Insulation resistance ≥ 20 MΩ*km (20 °C)
Smallest bending radius, fixed installation 55 mm
Smallest bending radius, movable installation 104 mm
Max. bending cycles 5000 (at a radius of ≥ 15x outside diameter)
Halogen-free no
Flame resistance IEC 60332-1-2 (raw cable)
VDE 0842, Part 332-1-2 (raw cable)
IEC 60332-3-22 (raw cable)
UL VW-1
CSA FT-1
Resistance to oil can withstand occasional splashes (raw cable)
IDC/FLK14 (1) () = black
IDC/FLK14 (2) () = brown
IDC/FLK14 (3) () = red
IDC/FLK14 (4) () = orange
IDC/FLK14 (5) () = yellow
IDC/FLK14 (6) () = green
IDC/FLK14 (7) () = blue
IDC/FLK14 (8) () = violet
IDC/FLK14 (9) () = gray
IDC/FLK14 (10) () = white
IDC/FLK14 (11) () = white-black
IDC/FLK14 (12) () = white-brown
IDC/FLK14 (13) () = white-red
IDC/FLK14 (14) () = white-orange
Cable type Cable for one module

Connection 1
Connection method Single wires
Stripping length (Sheath)  150 mm
Number of positions 14
Note The wires are marked and fitted with ferrules
Connection 2
Connection in acc. with standard based on IEC 60603-13
Connection method IDC/FLK socket strip
Number of connections 1
Number of positions 14
Insertion/withdrawal cycles > 50
Pitch 2.54 mm

Notes on operation For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.