VIP-2/SC/PDM-2/48 - Potential distributors

2903717

VARIOFACE module, with two equipotential busbars (P1, P2) for potential distribution, for mounting on NS 35 rails. Module width: 131.5 mm

Type of insulation housing Polyamide PA non-reinforced
Notes on operation For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.

Product type Potential distributor
Product family VARIOFACE Professional
Potential connections Per potential(P1, P2) 2 power/24 distributor terminal blocks
Insulation characteristics
Overvoltage category III
Pollution degree 2

Nominal voltage UN 250 V AC/DC
Max. current carrying capacity per branch 15 A
Max. total current of all branches 30 A (per potential)

Potential connections Per potential(P1, P2) 2 power/24 distributor terminal blocks

Service Entrance
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Number of connections 2
Conductor cross section rigid 0.2 mm² ... 6 mm²
Conductor cross section flexible 0.2 mm² ... 4 mm²
Conductor cross section AWG 24 ... 10
Distribution
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Number of connections 24
Number of positions 2
Conductor cross section rigid 0.2 mm² ... 4 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12

Width 131.5 mm
Height 65.5 mm
Depth 45.1 mm

Color gray (RAL 7042)

Ambient conditions
Ambient temperature (operation) -20 °C ... 50 °C (NOTE: At maximum relative humidity < 90%.)
Ambient temperature (storage/transport) -20 °C ... 70 °C (NOTE: At maximum relative humidity < 90%.)
Altitude < 2000 m
Permissible humidity (operation) 90 %
Permissible humidity (storage/transport) 90 %

Standards/regulations EN 50178

Mounting type DIN rail mounting
Mounting position any