SACC-DSI-FSX-8CON-PG9-L180 SCO - Device connector rear mounting

1404741

Device connector rear mounting, Ethernet CAT6A (10 Gbps), 8-position, Socket, straight-SPEEDCON, coding: X, Rear mounting, M12 x 1, Wave soldering, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238707

Notes on operation The electrical and mechanical data specified assumes that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of pollution, the connector must be sealed using a protective cap >IP54. Influences arising from litz wires, cables, or PCB mounting must also be taken into consideration. Additional mechanical fixing of the PCB is required.
Order information: Lock nut is included in the scope of delivery

Mounting type Rear mounting M12 x 1

Product type Circular connectors (device side)
Application Data
Sensor type Ethernet
Number of positions 8
Shielded yes
Coding X
Thread type M12
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Length of the solder pin 6 mm
6 mm

Material Zinc die-cast (nickel-plated)
Flammability rating according to UL 94 V0
Seal material FKM
Material of grip body Zinc die-cast, nickel-plated
Contact material CuZn
Contact surface material gold-plated
Contact carrier material PPA
Material for screw connection Zinc die-cast, nickel-plated

Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance > 100 MΩ
Nominal voltage UN 50 V AC
60 V DC
Nominal current IN 0.5 A (Data)
Transmission characteristics (category) CAT6A

Conductor connection
Connection method Wave soldering
Contact connection type Socket
Tightening torque 2 Nm ... 3 Nm

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Socket
Head cable outlet straight
Head locking type SPEEDCON
Coding X

Signal type/category Ethernet CAT6A, 10 Gbps

Ambient conditions
Degree of protection IP67 (When plugged in)
IP67
Ambient temperature (operation) -40 °C ... 85 °C

M12
Standard designation M12 connector
Standards/specifications IEC 61076-2-109
Standard designation Shock, vibration
Standards/specifications EN 50155