SACC-M 8FS-3QO-0,5-M - Connector

1441066

Connector, Universal, 3-position, Socket straight M8, coding: A, Insulation displacement connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 2.5 mm ... 5 mm

Assembly note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 3
No. of cable outlets 1
Shielded no
Coding A
Cable outlet straight
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Dimensional drawing
Length 38.8 mm
External dimensions
Outside diameter 2.5 mm ... 5 mm ±0.2 mm
Housing
Diameter housing 12.5 mm

Flammability rating according to UL 94 HB
Seal material NBR
Material of grip body PA 6
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material TPU GF
Material for screw connection Zinc die-cast, nickel-plated
Wire insulation material PVC / PE / PP / rubber

Conductor connection
Connection method Insulation displacement connection
Connection cross section 0.25 mm² ... 0.5 mm²
Connection cross section AWG 24 ... 20
Tightening torque 0.2 Nm (M8 knurl)
0.6 Nm (Pressure nut)
Pin assignment
Contact | Color (signal designation) | Contact (optional) 1 = BN
3 = BU
4 = BK

Rated surge voltage 0.8 kV
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC
Nominal current IN 4 A

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Socket
Head cable outlet straight
Head thread type M8
Coding A

Signal type/category Universal
External cable diameter 2.5 mm ... 5 mm

Ambient conditions
Degree of protection IP65
IP67
Ambient temperature (operation) -25 °C ... 80 °C (Plug / socket)

M8
Standard designation M8 connector
Standards/specifications IEC 61076-2-104