Company: | 上海当临自动化科技有限公司 |
Location: | China - Shanghai,上海市青浦区练西公路2850号1幢 |
Price: | Negotiation |
Contact: | Jason(Manager) |
Contact Me: |
Tell:+86-19921425125 Mobile:+86-19921425125 Email:61525412124884495128545111@q23q.11c71om |
SACC-M12MRS-2PECON-PG 9-M - Power connector
SACC-M12MRS-2PECON-PG 9-M - Power connector
1419641
Power connector, 3-position, Plug angled M12, coding: S, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm, for alternating current up to 16 A/630 V, Contact 4 leading
General Strip 21 mm off the cable sheath, strip 6 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Conductor length with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
Assembly note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Assembly note The connector pin assignment can be rotated 90° to the cable outlet
Product type Circular connector (cable-side)
Application Power supply
Number of positions 3
No. of cable outlets 1
Shielded no
Coding S
Cable outlet angled
Pg screw connection Pg9
Insulation characteristics
Overvoltage category III
Degree of pollution 3
Dimensional drawing
Length 41 mm
Wrench size, union nut 16 mm
External dimensions
Outside diameter 6 mm ... 8 mm
Housing
Diameter housing 20 mm
Flammability rating according to UL 94 V0
Seal material NBR
Material of grip body PA
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material for screw connection Zinc die-cast, nickel-plated
Conductor connection
Connection method Screw connection
Connection cross section 0.75 mm² ... 1.5 mm² (with ferrule)
0.75 mm² ... 2.5 mm² (solid)
Connection cross section AWG 18 ... 16 (with ferrule)
Stripping length of the individual wire 5 mm
Tightening torque 0.4 Nm (M12 knurl)
0.8 Nm ... 1 Nm (Pressure screw with sleeve housing)
0.4 Nm (Screw plug insert with sleeve housing as far it will go)
0.2 Nm (Screw terminal blocks)
Rated surge voltage 6 kV
Contact resistance ≤ 5 mΩ
Insulation resistance > 10 GΩ
Nominal voltage UN 630 V AC
Nominal current IN 16 A (when using 2.5 mm² conductors)
16 A (at 40 °C)
Mechanical data
Insertion/withdrawal cycles > 100
Connection 1
Head design Plug
Head cable outlet angled
Head thread type M12
Coding S
Stripping length of the individual wire 5 mm
Ambient conditions
Degree of protection IP67
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- Crane weighing scale for heavy loads equipmentMultiple Units : These scales can display weight measurements in various units , such as kilograms , pounds , ounces , or newtons , depending on the scale" "
- 833140N Digital Hang LED Scale Hanging Crane ScaleDigital Display : Most crane scales are equipped with a digital display that provides real-time weight readings ." "
- Rhorawill Crane Scale 300kgs Double Accuracy ElectronicCrane weighing scales , also known as crane scales or crane load cells , are specialized weighing devices designed for the purpose of lifting and weighing" "
- OCS-T-300kg Digital Hanging ScaleLCD digital crane mini hanging scale for commercial use The mini hanging scale features a die-cast aluminum casing for added strength ." "