SACC-DSI-M12FS-8CON-M16/0,5 - Device connector rear mounting

1419690

Device connector rear mounting, Universal, 8-position, Socket, straight, M12-Standard, coding: A, on free cable end, Rear mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1237438

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information: Lock nut is included in the scope of delivery
General Contact connection method: Crimp connection

Mounting type Rear mounting M16 x 1.5 With flat nut
Assembly note With flat nut

Product type Circular connectors (device side)
Sensor type Universal
Number of positions 8
No. of cable outlets 1
Shielded no
Coding A
Thread type M12
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Flammability rating according to UL 94 V0
Seal material FKM
Contact material CuZn
Contact surface material Au
Contact carrier material PA 6.6
Material for screw connection Zinc die-cast, nickel-plated
Conductor material Tin-plated Cu litz wires

Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V (AC)
30 V (DC)
Nominal current IN 2 A
Transmission medium Copper
Max. conductor resistance 80 mΩ/m

Conductor connection
Connection method Individual wires
Contact connection type Socket
Conductor cross section 0.25 mm²
Tightening torque 3 Nm ... 4 Nm (Installation-side)

Mechanical data
Insertion/withdrawal cycles > 100

Connection 1
Head design Socket
Head cable outlet straight
Head thread type M12
Head locking type Standard
Coding A
Connection 2
Head design free cable end

Cable length 0.5 m
Cable type TPE litz wire
Signal type/category Universal
Wire diameter incl. insulation 1.15 mm ±0.07 mm
Single wire, color brown, blue, white, gray, pink, red, yellow, green
Cable cross section 0.25 mm²
Conductor material Tin-plated Cu litz wires
Conductor structure signal line 14x 0.15 mm
AWG signal line 24
Material wire insulation TPE
Thickness, insulation 0.21 mm
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Cable resistance ≤ 80 mΩ/m
Cable insulation resistance ≥ 20 MΩ*km
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)

Ambient conditions
Degree of protection IP67 (When plugged in)
IP65 (When plugged in)