MINI MCR-2-I4-U-PT - Signal conditioner

2902003

3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 4 mA ... 20 mA, output signal: 0 V ... 10 V, push-in connection technology

Standard signal 3-way signal conditioner with plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard signals. The measuring transducer supports fault monitoring and NFC communication.

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Product type Signal conditioner
Product family MINI Analog Pro
No. of channels 1
Type Signal conditioner
Insulation characteristics: GB Standard
Overvoltage category II
Pollution degree 2

Electrical isolation 3-way isolation
Electrical isolation between input and output yes
Limit frequency (3 dB) approx. 30 Hz
Protective circuit Transient protection
Step response (10-90%) approx. 10 ms
Maximum temperature coefficient 0.01 %/K
Temperature coefficient, typical 0.01 %/K
Maximum transmission error 0.1 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage 300 Vrms
Test voltage 3 kV AC (50 Hz, 60 s)
Insulation Reinforced insulation according to IEC/EN 61010-1
Supply
Nominal supply voltage 24 V DC
Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption 25 mA (24 V DC)
54 mA (12 V DC)
Power consumption ≤ 200 mW (at 9.6 V DC)

Signal: Current
Number of inputs 1
Configurable/programmable no
Current input signal 4 mA ... 20 mA
Input resistance current input approx. 63 Ω (+0.7 V for test diode)

Signal: Voltage
Number of outputs 1
Configurable/programmable no
Voltage output signal 0 V ... 10 V
Max. voltage output signal 11 V
Short-circuit current < 15 mA
Load/output load voltage output ≥ 10 kΩ
Ripple < 20 mVPP (at 10 kΩ)

Connection method Push-in connection
Stripping length 10 mm
Conductor cross section rigid 0.2 mm² ... 2.5 mm² (with ferrule)
0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12 (flexible)

Ex installation (EPL) Gc
Div. 2

Status display Green LED (supply voltage)

Width 6.2 mm
Height 109.81 mm
Depth 119.2 mm

Color gray (RAL 7042)
Housing material PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2

Ambient conditions
Degree of protection IP20 (not assessed by UL)
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)

CE
Certificate CE-compliant
ATEX
Identification  II 3 G Ex ec IIC T4 Gc
Certificate BVS 19 ATEX E 047 X
UKCA Ex (UKEX)
Identification  II 3 G Ex ec IIC T4 Gc
Certificate PxCIF21UKEX2902000X
IECEx
Identification Ex ec IIC T4 Gc
Certificate IECEx BVS 19.0041X
CCC / China-Ex
Identification Ex nA IIC T4 Gc
UL, USA/Canada
Identification UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
Shipbuilding approval
Certificate DNV GL TAA00002UA
EAC Ex
Identification  2Ex ec IIC T4 Gc
Certificate BY/112 02.01 TP012 103.01 00079
DNV GL data
Temperature B
Humidity B
Vibration A
EMC A
Enclosure Required protection according to the Rules shall be provided upon installation on board