FL SWITCH IRT IP 4TX - Industrial Ethernet Switch

2700694

Ethernet Switch, with four push-pull 10/100 Mbps RJ45 ports for PROFINET RT/IRT, in degree of protection IP67

The FL SWITCH IRT are four-port switches for PROFINET applications. The ERTEC 400 switch architecture ensures optimum integration and diagnostics of infrastructure components in PROFINET networks. This enables the switches and all their functions to be configured by a higher-level PROFINET controller. Using the available GSDML or FDCML files, easy and reliable integration into the higher-level engineering system is ensured.
The devices offer the following features:
- Diagnostics and parameterization are carried out via the PROFINET protocol from the controller.
- The switches can be parameterized by any controller using the PROFINET functionality and integrated into the engineering system.
- LLDP support for topology detection in the PROFINET environment.
- DCP protocol for IP address assignment directly from the controller.
- MEM PLUG parameterization memory for storing the device configuration.
- POF-SCRJ ports for polymer or PCF fibers for field assembly including monitoring of the path quality via PROFINET and diagnostics LEDS directly on the switch.
- Thanks to the use of ERTEC 400, the switches from the FL SWITCH IRT range support PROFINET IRT including the cut-through method.
- Web-based management for easy monitoring and configuration in a web browser.
- SNMP support for monitoring and configuration with standard IT tools.

Width 176 mm
Height 112 mm
Depth 99 mm
Drill hole spacing 155 mm

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Zinc die-cast, surface bronzed and nickel-plated

Mounting type Wall mounting

Ethernet
Connection method RJ45
Transmission speed 10/100 Mbps
Transmission physics Copper
Transmission length 100 m (per segment)
Signal LEDs Supply voltage, data transmission, error, link, activity
No. of channels 4 (RJ45 ports)

Product type Switch
Product family Managed Switch IRT
Type Stand-Alone
MTTF 362.73 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
218.23 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
37.87 Years (SN 29500 standard, temperature 60°C, operating cycle 100%)
Switch functions
Basic functions Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device.
Signal contact control voltage 24 V
PROFINET conformance class Conformance-Class C
PROFINET device function PROFINET device
PROFINET specification PROFINET-IO RT/IRT, Spec. 2.x
Redundancy MRP (Media Redundancy Protocol)
Status and diagnostic indicators LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and FO status), and BF (Bus Fail)
Supported browsers Internet Explorer 5.5 or higher
Security functions
Basic functions Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device.

Local diagnostics US1/2 Supply voltage US1, US2 Green LED
FAIL Div. LED red
LINK Link status Green LED
ACT Receiving/sending telegrams Green LED
BF Bus errors LED red
Maximum power dissipation for nominal condition 3.96 W
Test section Between the Ethernet ports 1500 V AC 1 min.
24 V supply (US) / FE 500 V DC 1 min.
Transmission medium Copper
Supply
Supply voltage (DC) 24 V DC (redundant)
Supply voltage range 18.5 V DC ... 30.2 V DC
Power supply connection Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 165 mA
Typical current consumption 165 mA (at US = 24 V DC)
Current consumption 165 mA (at 24 V DC)
Function
Signal contact control voltage 24 V
Supply: Module electronics
Supply voltage 24 V DC
Supply voltage range 18 V DC ... 32 V DC (including ripple)