PLD M 260 W-40/80 190/D40 - LED machine light

2702938

LED machine light, 24 V DC, emission angle (vertical/Horizontal): 40 °/80 °, length: 190 mm, diameter: 40 mm, degree of protection: IP67, can be swiveled, resistant to coolants and lubricants

This LED machine light is designed to provide illumination inside or on machinery. You can use the light in harsh environments. This is possible thanks to the following properties: - High type of protection - Resistance to common cooling agents and lubricants - Resistance to vibrations and shock - 4 mm-thick safety glass The small diameter of just 40 mm enables mounting even where space is at a premium. Mounting is by means of holders or brackets (neither of which are supplied as standard) in which the light can swivel and the lighting can therefore be optimally aligned.

Order information: The PLD M-ME MC/D40 mounting holder (Item No. 2702491) or the PLD M-ME MB/D40 mounting bracket (Item No. 2702527) is required in order to mount the light.

Product type Machine light
Application Machine tool
Mounting position any
Special properties can be swiveled with mounting accessories
resistant to coolants and lubricants

Supply: Module electronics
Connection method M12 connector (A-coded)
Number of positions 4
Permissible conductor cross section min. 0.34 mm²
Supply voltage 24 V DC
Supply voltage range 20 V DC ... 28 V DC
Current consumption typ. 0.21 A (at 24 V DC)
Power consumption approx. 5 W (at 24 V DC)
Protective circuit Surge protection; Varistor and suppressor diode, 36 V DC
Reverse polarity protection; Polarity protection diode

Connection method M12 connector (A-coded)

Light properties
Source of light type LED
Number of LEDs 12
Service life, lighting appliance 60000 h (L70)
Color temperature 5000 K
Color rendering index 80
Luminous flux approx. 490 lm (Net luminous flux)
Luminous efficacy approx. 98 lm/W
Illumination max. 393 lx (Distance of 1 m)
min. 89 lx (Distance of 1 m over 1 m² area)
Average illumination 223 lx (Distance of 1 m over 1 m² area)
Emission angle 40 ° (C0-C180)
80 ° (C90-C270)
Ordinance Delegated Regulation (EU) 2019/2015
Energy efficiency class E (1 light source)
Note This product contains an energy efficiency class E light source.

Dimensional drawing
Width 40 mm
Height 30 mm
Length 190 mm
Diameter 40 mm
Note on dimensions Length without M12 flush-type connector

Color aluminum color
Material () Anodized aluminum (Light housing)
Single-pane safety glass (ESG, thermally toughened float glass) (Pane)

Ambient conditions
Ambient temperature (operation) 0 °C ... 50 °C
Degree of protection IP67
Air pressure (operation) 69 kPa ... 102 kPa
Air pressure (storage/transport) 69 kPa ... 102 kPa
Ambient temperature (storage/transport) -20 °C ... 75 °C
Permissible humidity (operation) 95 % (non-condensing)
Permissible humidity (storage/transport) 95 % (non-condensing)

Protection class III (IEC 61140, EN 61140, VDE 0140-1)

Mounting type Screw mounting
Assembly note Mounting with mounting holders or mounting brackets, please observe the notes in the package slip.
Mounting position any