IB IL 24 PSDOR 4-F-PAC - Safety module

2700563

Safety-related distributed relay output module, IP20 protection, for the PROFIsafe system. The module has 4 safe relay outputs, each with two contacts. The output states are mirrored for diagnostic purposes.

The safety module is an output module from the Inline product range, designed for use in a PROFIsafe system. The safety module can be used as part of an Inline station at any point within a PROFIsafe Inline system. The transmission speed can be set to 500 kbaud or 2 Mbaud on the safety module using a switch. One transmission speed must be used consistently within a station. The module has four safe relay outputs, each with two relay contacts. The output states are mirrored for diagnostic purposes.

Width 73.2 mm
Height 119.8 mm
Depth 71.5 mm
Note on dimensions Housing dimensions

Inline local bus
No. of channels 2
Connection method Inline data jumper
Transmission speed 500 kbps / 2 Mbps (can be switched)

Module
ID code (dec.) 175
ID code (hex) AF
Length code (hex) 04
Length code (dec) 04

Relay
Number of outputs 4 (Safety relays with 2 floating contacts each)
Connection method Spring-cage connection
Contact switching type N/O contact

Product type I/O component
Product family Inline
Application Functional safety
PROFIsafe
Type modular

Maximum power dissipation for nominal condition 8.7 W
Transmission medium Copper
Potentials: Communications power (UL)
Supply voltage 7.5 V DC (see safety data)
Current draw max. 360 mA
Potentials: Main circuit supply (UM)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including ripple)
Current draw typ. 30 mA
Potentials: Segment circuit supply (US)
Supply voltage 24 V
Supply: Module electronics
Supply voltage 24 V DC (via voltage jumper)
Supply voltage range 19.2 V DC ... 30 V DC
Electrical isolation/isolation of the voltage ranges
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC, 50 Hz, 1 min.
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic)/24 V supply (UM, US), GND, clock outputs, relay outputs, FE 500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (UM, US), GND, clock outputs/7.5 V supply (bus logic), relay outputs 500 V AC, 50 Hz, 1 min.
Test voltage: COMBICON X3 relay outputs/COMBICON X4 relay outputs, Inline connector relay outputs,7.5 V supply (bus logic), 24 V supply (UM, US), GND, clock outputs, FE 2500 V AC, 50 Hz, 1 min.
Test voltage: COMBICON X4 relay outputs/COMBICON X3 relay outputs, Inline connector relay outputs,7.5 V supply (bus logic), 24 V supply (UM, US), GND, clock outputs, 2500 V AC, 50 Hz, 1 min.

Connection technology
Connection name Inline connector
pluggable yes
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.2 mm² ... 1.5 mm²
Conductor cross section flexible 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Inline connector
Connection method Spring-cage connection
Conductor cross section, rigid 0.2 mm² ... 1.5 mm²
Conductor cross section, flexible 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16