IBS IL 24 BK-LK-2MBD-PAC - Bus coupler

2862068

Inline, Bus coupler, INTERBUS, F-SMA connector, transmission speed in the local bus: 2 Mbps, degree of protection: IP20, including Inline connector and labeling field

The bus coupler connects an Inline station to the INTERBUS remote bus and provides the supply voltages for the connected analog modules.

Dimensional drawing
Width 85 mm
Height 119.8 mm
Depth 71.5 mm

INTERBUS
Number of interfaces 2
Connection method F-SMA connector
Transmission speed 2 Mbps
Transmission physics FO
Inline local bus
Number of interfaces 1
Connection method Inline data jumper
Transmission speed 2 Mbps

System limits
Number of local bus devices that can be connected 63
Number of devices with parameter channel 62
Number of supported branch terminals with remote bus branch max. 15
Module
ID code (dec.) 04
ID code (hex) 04
Length code (hex) 00
Length code (dec) 00
Process data channel 0 bit
Input address area 0 Byte
Output address area 0 Byte
Register length 0 bit

Product type I/O component
Product family Inline
Type modular
Scope of delivery including Inline connector and labeling field

Maximum power dissipation for nominal condition 30 W
Protective circuit Reverse polarity protection
Potentials: Bus coupler supply UBK; Communications power UL (7.5 V) and the analog supply UANA (24 V) are generated from the bus coupler supply.
Supply voltage 24 V DC (via Inline connector)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 1.25 A (with max. number of connected I/O terminal blocks)
Potentials: Communications power (UL)
Supply voltage 7.5 V DC ±5 %
Potentials: Supply of analog modules (UANA)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Electrical isolation/isolation of the voltage ranges
Test voltage: 7.5 V communications power, 24 V analog supply, 24 V bus coupler supply/functional ground 500 V AC, 50 Hz, 1 min.

Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.09 mm² ... 1.5 mm²
Conductor cross section flexible 0.09 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
Inline connector
Connection method Spring-cage connection
Conductor cross section, rigid 0.09 mm² ... 1.5 mm²
Conductor cross section, flexible 0.09 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm

Ambient conditions
Ambient temperature (operation) -25 °C ... 55 °C
Degree of protection IP20
Air pressure (operation) 80 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 75 % ... 85 %
Permissible humidity (storage/transport) 75 % ... 85 %

Mounting type DIN rail mounting