IOL MA8 EIP DI8 - Communication module

1072839

Eight-channel IO-Link master provides convenient configuration of IO-Link devices using web-based management. Supports connectivity to EtherNet/IP, MODBUS, and OPC UA. Features eight auxiliary digital inputs, redundant input power supply connections, plug-in push-in terminals.

Provides connectivity to EtherNet/IP, MODBUS TCP, and OPC UA networks. It enables the operation of up to eight IO-Link sensors/actuators and is also used to acquire digital signals. The device is designed for use in systems manufacturing.

Width 45 mm
Height 114.5 mm
Depth 99 mm

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Polyamide
Color gray

EtherNet/IP™
No. of channels 2
Connection method RJ45 jack
Transmission speed 10/100 Mbps (with auto negotiation)
Transmission physics Ethernet in RJ45 twisted pair
EtherNet/IP™
Equipment type EtherNet/IP™ device

Digital:
Input name Digital inputs
Description of the input IEC 61131-2 type 1
Number of inputs 8
Connection method Push-in / plug connection
Connection technology 3-conductor
Input voltage range "0" signal 0 V DC ... 5 V DC
Input voltage range "1" signal 15 V DC ... 30 V DC
Nominal input voltage UIN 24 V DC
Nominal input current at UIN typ. 3.5 mA
Input frequency 0.5 kHz
Protective circuit Overload protection
Short-circuit protection for the sensor supply
Digital
Input name Digital inputs
Description of the input IO-Link ports in digital input (DI) mode
Number of inputs max. 8 (EN 61131-2 types 1 and 3)
Connection method Push-in / plug connection
Connection technology 3-conductor
Nominal input voltage UIN 24 V DC
Input voltage range "0" signal 8 V DC ... 11.5 V DC (for C/Q pin)
Input voltage range "1" signal 10.5 V DC ... 13 V DC
Sensor current per channel max. 200 mA (from L+/L-)
Total sensor current max. 1.6 A (from L+/L-)
Protective circuit Overload protection; yes
Short-circuit protection for the sensor supply; electronic
IO-Link
Description of the input Digital inputs (DI)
Connection method Push-in / plug connection
Nominal input voltage UIN 24 V DC
Input voltage range "0" signal 5.2 V DC ... 6.4 V DC
Input voltage range "1" signal 6.8 V DC ... 8 V DC
Nominal input current typ. 3.5 mA
Sensor current per channel max. 200 mA (from L+/L-)
Total sensor current max. 1.6 A (from L+/L-)
Protective circuit Overload protection; yes
Short-circuit protection for the sensor supply; yes
IO-Link
Number of ports 8
Connection method Push-in / plug connection
Connection technology 3-conductor
Cycle Time min. 4 ms (IO-Link cycle time)

Digital:
Maximum output current per channel 200 mA
Digital
Output description IO-Link ports in digital output (DO) mode
Connection method Push-in / plug connection
Connection technology 3-conductor
Number of outputs max. 8
Nominal output voltage 24 V DC
Maximum output current per channel 200 mA