IB IL 24/230 DOR4/W-PC-PAC - Relay Module

2862181

Inline, Relay terminal, Relay outputs: 4 (floating), Changeover contact, 24 V DC, 230 V AC, for switching inductive and capacitive loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields

The terminal is designed for use within an Inline station. It has four floating SPDT relay contacts, which are independent of one another.

Dimensional drawing
Width 48.8 mm
Height 119.8 mm
Depth 71.5 mm
Note on dimensions Housing dimensions

Color gray

Inline local bus
Number of interfaces 2
Connection method Inline data jumper
Transmission speed 500 kbps

Module
ID code (dec.) 189
ID code (hex) BD
Length code (hex) 41
Length code (dec) 65
Process data channel 4 bit
Input address area 0 Byte
Output address area 4 bit
Register length 4 bit
Required parameter data 3 Byte
Required configuration data 4 Byte

Relay
Number of outputs 4 (floating)
Connection method Spring-cage connection
Contact switching type Changeover contact
Switching voltage min. 5 V DC
max. 250 V DC

Product type I/O component
Product family Inline
Type modular
Scope of delivery including Inline connectors and marking fields
No. of channels 4
Special properties for switching inductive and capacitive loads

Potentials: Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current draw max. 187 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: Relay contact / Bus logics 4 kV, 50 Hz, 1 min.
Test voltage: Contact/contact 1 kV, 50 Hz, 1 min.
Test voltage: Contact / PE 1 kV, 50 Hz, 1 min.

Connection technology
Connection name Inline connector
Conductor connection
Connection method Spring-cage connection
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm
Inline connector
Connection method Spring-cage connection
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16
Stripping length 8 mm

Ambient conditions
Ambient temperature (operation) -25 °C ... 55 °C
Degree of protection IP20
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (operation) 75 % ... 85 % (in the range of -25°C ... +55°C, appropriate measures against increased humidity (> 85%) must be taken.)
Permissible humidity (storage/transport) 75 % ... 85 % (slight temporary condensation may sometimes appear on the housing)