SACC-DSI-FSY-8CON-M16-L180 SCO - Device connector rear mounting

1407503

Device connector rear mounting, Ethernet CAT5 (IEC 11801:2002) (100 Mbps), 8-position, Socket, M12-SPEEDCON, coding: Y, Rear mounting, M16 x 1.5, Solder pins, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238748

Notes on operation The electrical and mechanical data specified assumes that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of pollution, the connector must be sealed using a protective cap >IP54. Influences arising from litz wires, cables, or PCB mounting must also be taken into consideration. Additional mechanical fixing of the PCB is required.
Order information: Lock nut is included in the scope of delivery

Mounting type Rear mounting M16 x 1.5

Product type Circular connectors (device side)
Sensor type Ethernet
Number of positions 8
Shielded yes
Coding Y
Thread type M12
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Material Zinc die-cast (nickel-plated)
Flammability rating according to UL 94 V0
Seal material FKM
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PPA
Material for screw connection Zinc die-cast, nickel-plated

Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance > 100 MΩ
Nominal voltage UN 48 V AC (Power and data)
50 V DC (Power and data)
Nominal current IN 0.5 A (Data)
6 A (Power)
Transmission medium Copper
Transmission characteristics (category) CAT5 (IEC 11801:2002)

Conductor connection
Connection method Solder pins
Contact connection type Socket
Tightening torque 3 Nm ... 4 Nm (Installation-side)

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Socket
Head thread type M12
Head locking type SPEEDCON
Coding Y

Signal type/category Ethernet CAT5 (IEC 11801:2002), 100 Mbps

Ambient conditions
Degree of protection IP67
IP67
Ambient temperature (operation) -25 °C ... 85 °C
-40 °C ... 85 °C (without mechanical actuation)

M12
Standard designation M12 connector
Standards/specifications IEC 61076-2-113